#ad
bayite #ad - The od of the brass coupler is 10mm. It's perfect for the home solar water heating systems or other circulation pump application. Max flow Rate: 2. 1gpm, max discharge Head: 9. 8ft. It's submersible but can't be immersed in hot water exceeding 50°C/122℉. 1/2" male thread on the pump. W/ two brass coupler Max Flow Rate: 8L/Min2.

1gpm max water Head: 3 metre9. 8ft max system pressure: 10bar145psi Max circulating water temperature: 100°C/212°F. Fit both 1/2" npt and BSP female thead. Power source: dc 12vpower adapter included, brushless motor, rated current: 07a, low noise: 30db at 1 metre, Service life: 30000 hours. Max circulating water temperature: 100°c/212°F.

bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM #ad - Comes with a power adapter. We've tested. Can't be immersed in hot water exceeding 50°c/122℉ item included: 1x bayite DC 12V Circulation Water Pump 1x AC 110v to DC 12v power adapter Circulation pump is non-self-priming pump. One year warranty: replacement without return. Brushless motor, super long working life, low consumption and low noise Power source: DC 12V Rated current: 0

7a low noise: 30db at 1 metre service life: 30000 hours up Inlet/Outlet: 1/2" male thead.

More information about bayite #ad

Eagle Brewing BE510 Siphon Spray Wort Aerator

#ad
JGB Enterprises BE510 #ad - Attach this aerator/diffuser to the end of your transfer tubing when filling your fermenter. Use ce20 hose thread adaptor to attach to your sink. Increase dissolved oxygen in your wort. The jgb enterprises siphon wort Aerator was made to increase dissolved oxygen in your wort without having to rock or shake a heavy fermenter.

Eagle Brewing BE510 Siphon Spray Wort Aerator #ad - . It works with 3/8" tubing. No need to rock or shake a heavy fermenter with this aerator/diffuser. 7 lbs.

More information about JGB Enterprises BE510 #ad


Similar products



ZAOJIAO Home Brewing and Winemaking Silicone Tubing, 10mm3/8 inch ID x 13mm1/2 inch OD, 10 ft, High Temp Food Grade Tube, Flexible Hose Pipe with Stainless Worm Gear Hose Clamps

#ad
ZAOJIAO #ad - The inside diameterid: 10mm3/8 inch, the outside diameterOD: 13mm1/2 inch. The thickness of tube is 1. 5mm. No need to rock or shake a heavy fermenter with this aerator/diffuser. Use ce20 hose thread adaptor to attach to your sink. Length: 10 ft. High temperature silicone tubing. It is made of silicone which is nonreactive, flexible, and resistant to high temperatures.

ZAOJIAO Home Brewing and Winemaking Silicone Tubing, 10mm3/8 inch ID x 13mm1/2 inch OD, 10 ft, High Temp Food Grade Tube, Flexible Hose Pipe with Stainless Worm Gear Hose Clamps #ad - Please note: make sure to always wash before use! Package includes: 1x 10 ft Silicone Tubing 2x Hose Clamps Increase dissolved oxygen in your wort. It is easy to use, shape, and bend and can be easily cut by any cutting tool. The tubings are safe to use and well suited for beverage and brewing, in the kitchen.

It can work under mashing, etc. 7 lbs. Food grade, soft, flexible and durable. Size. This soft, flexible tubing is designed for a variety of pump and transfer applications. Temperature: -20-200℃. Uv resistant, boiling wort, hot water, boil temps, gases and moisture resistant.

More information about ZAOJIAO #ad


Similar products



Brewer's Edge Mash and Boil

#ad
Brewer's Edge #ad - The mash and boil's exclusive double wall stainless construction conserves heat to achieve a rolling boil with only 110 volts and 1600 watts, and its precise thermostat and internal sparging basket lets you mash and boil in the same vessel. No need for an outdoor burner, complicated brewing stand, or a 220 volt special circuit - it plugs into any 110 volt GFI household outlet.

Plugs into Standard Wall Outlet. No need to rock or shake a heavy fermenter with this aerator/diffuser. Temperature: -20-200℃. External stainless Steel 1/2in Valve. Double wall, Stainless Steel Construction. It also features a delayed start timer, so you can program the Mash and Boil to turn on up to 24 hours after setting.

Brewer's Edge Mash and Boil #ad - 7 lbs. The brewer's edge mash and Boil makes All Grain Brewing easy and affordable. The mash & boil features an adjustable thermostat switchable from Fahrenheit to Celsius with an adjustable run time preset at 3-1/2 hours for safety. Use ce20 hose thread adaptor to attach to your sink. Length: 10 ft. High temperature silicone tubing.

More information about Brewer's Edge #ad


Similar products



10 ft. - Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing

#ad
Midwest Homebrewing and Winemaking Supplies HOZQ8-1135 #ad - Precut 1/2 inch iD silicone tubing - 10 ft. Country of origin - united States, manufacturer name - Midwest home brewing and winemaking supplies. External stainless Steel 1/2in Valve. Precut 1/2 inch. Temperature: -20-200℃. The inside diameterid: 10mm3/8 inch, the outside diameterOD: 13mm1/2 inch. Food grade, soft, flexible and durable.

Size. Precut 1/2 inch iD silicone tubing - 10 ft. Precut 1/2 inch id silicone tubing, feature: 10 ft. High Temp tubing. It can work under mashing, etc. Feature: 10 ft. High temp tubing. 7 lbs. Maximum capacity of 7. 5 gallons. Plugs into Standard Wall Outlet. Increase dissolved oxygen in your wort. Length: 10 ft. High temperature silicone tubing.

10 ft. - Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing #ad - Uv resistant, boil temps, hot water, boiling wort, gases and moisture resistant.

More information about Midwest Homebrewing and Winemaking Supplies HOZQ8-1135 #ad


Similar products



Brewing 6x14in Hopper Spider Strainer - Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter

#ad
G Francis 8541954724 #ad - This hops spider can also be used in water pumps, water filters, and even vacuum cleaners or air conditioning units. The 300-micron mesh can be used for about 8 ounces of any kind of hops. Maximum capacity of 7. 5 gallons. Food grade, soft, flexible and durable. Size. For more information go to www. P65warnings. Ca. Gov.

It can work under mashing, etc. Francis brewing 6" x 14" inch hopper spider strainer - Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter. Length: 10 ft. High temperature silicone tubing. No need to rock or shake a heavy fermenter with this aerator/diffuser. Filter beer, tea: we love beer, and finished beer, resulting in a clearer beer and better taste; suitable for brewing beer, making compost tea, filtering coffee, chillers, COFFEE, but what is better than the beverage itself is the satisfaction of creating it; The G.

Brewing 6x14in Hopper Spider Strainer - Stainless Steel 300 Micron Mesh Homebrew Hops Beer & Tea Kettle Brew Filter #ad - Your fermenter will no longer end up with built-up residue from the hops. Eliminate pump-clogging hops residue and experience the luxury of a durable mesh filter with the G. Double wall, Stainless Steel Construction. It will keep hops together during the boil and can be used on all standard sized boil pots.

More information about G Francis 8541954724 #ad


Similar products



HomeBrewStuff 1/2" Stainless Steel Valve Weldless Bulkhead for Home Brew Kettle

#ad
HomeBrewStuff SS-WV2 #ad - External stainless Steel 1/2in Valve. The thickness of tube is 1. 5mm. Increase dissolved oxygen in your wort. Installation instructions. The inside diameterid: 10mm3/8 inch, the outside diameterOD: 13mm1/2 inch. Use ce20 hose thread adaptor to attach to your sink. Built to last: 300-micron mesh that will not wrinkle or damage easily; Frame made from firm stainless steel for strength and longevity; Will resist rust, corrosion, heat, and pressure; Enables easier sterilization prior to brewing and easy cleanup.

Easy storage: 2 kettle hanging hooks on top end of basket offers stability, clean, and sanitize; Care of this hops spider is easy - you can put in the dishwasher as a separate load with no soap, user-friendliness, and versatility; Easier than beer cloth hops bags to remove, or simply use a garden hose to wash it out; A no-rinse cleaner and sponge after you rinse it off also works.

HomeBrewStuff 1/2" Stainless Steel Valve Weldless Bulkhead for Home Brew Kettle #ad - Filter more: filter has a 14-inch height and 6-inch diameter 35. 6cm x 15. 2cm; suitable for hop pellet capacity of approximately 8 ounces 227g. All fittings are 304 stainless steel, 1/2\" NPT thread. 7 lbs. Francis brewing 6" x 14" inch hopper spider Strainer is designed for kettle brewing systems to contain hops while keeping debris out of pumps, and putting into a boil pot.

Easy to use: two hook handles firmly secure this filter over the edge of your kettle and, during the boil, hops can be poured directly into the spider; For any standard electric brewing system.

More information about HomeBrewStuff SS-WV2 #ad


Similar products



Home Brew Fitting 304 Stainless Steel Pack of 2 - DERNORD 1/2" Barbed Hose x 1/2" NPT Female

#ad
DERNORD #ad - Great for attaching 1/2" inner diameter hose, and 1/2" ball valve. The inside diameterid: 10mm3/8 inch, the outside diameterOD: 13mm1/2 inch. Increase dissolved oxygen in your wort. 1/2" barb hose to 1/2" NPT Fitting. Product features this dernord stainless steel hose adapter has a 1/2" female end for connecting to threaded pipe conforming to National Pipe Thread NPT standards and a barbed fitting for connecting to hose with a 1/2" inside diameter.

Maximum capacity of 7. 5 gallons. The thickness of tube is 1. 5mm. The barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule sold separately, and a male NPT fitting on the other end connects to threaded pipe to form a tight, fixed connection.

Home Brew Fitting 304 Stainless Steel Pack of 2 - DERNORD 1/2" Barbed Hose x 1/2" NPT Female #ad - Food grade, soft, flexible and durable. Size. Length: 10 ft. High temperature silicone tubing. Double wall, Stainless Steel Construction. Filter beer, resulting in a clearer beer and better taste; suitable for brewing beer, and finished beer, making compost tea, COFFEE, TEA: We love beer, filtering coffee, chillers, but what is better than the beverage itself is the satisfaction of creating it; The G.

1/2" stainless hose barb.

More information about DERNORD #ad


Similar products



Brewing BE510 Siphon Spray Wort Aerator New Premium Materials

#ad
JGB Enterprises #ad - Attach this aerator/diffuser to the end of your transfer tubing when filling your fermenter. It works with 3/8" tubing. 7 lbs. Length: 10 ft. High temperature silicone tubing. The thickness of tube is 1. 5mm. Installation instructions. Temperature: -20-200℃. No need to rock or shake a heavy fermenter with this aerator/diffuser.

Precut 1/2 inch. 1/2" barb hose to 1/2" NPT Fitting. Increase dissolved oxygen in your wort. Increase dissolved oxygen in your wort. Francis brewing 6" x 14" inch hopper spider Strainer is designed for kettle brewing systems to contain hops while keeping debris out of pumps, and putting into a boil pot. Easy to use: two hook handles firmly secure this filter over the edge of your kettle and, during the boil, hops can be poured directly into the spider; For any standard electric brewing system.

Brewing BE510 Siphon Spray Wort Aerator New Premium Materials #ad - Plugs into Standard Wall Outlet. Use ce20 hose thread adaptor to attach to your sink. Food grade, soft, flexible and durable. Size. Double wall, Stainless Steel Construction.

More information about JGB Enterprises #ad


Similar products



OneBom Beer Ball Valve, 1/2'' Weldless Bulkhead Fitting with 12mm Barb, Full Port SS Brewing Kettle Valve 2 Piece

#ad
OneBom #ad - High temp silicone seals. We offer additional 2pc O-Rings for replacement. Pls note - 12mm barb equals 047''. Features 1. Disassembles for easy cleanup, seal well without leaks 2. Comes with additional 2pcs O-Ring seal to prevent leaking 3. Wog1000 1000psi to withstand high pressure and high temperatures. Feature: 10 ft.

High temp tubing. Click the "add to cart" Button and Buy with No Regrets. Length: 10 ft. High temperature silicone tubing. The tube should be the same or smaller than 047''. 1/2" weldless bulkhead fitting fits 7/8" kettle hole. Stainless steel full port ball valve. No need to rock or shake a heavy fermenter with this aerator/diffuser.

OneBom Beer Ball Valve, 1/2'' Weldless Bulkhead Fitting with 12mm Barb, Full Port SS Brewing Kettle Valve 2 Piece #ad - The thickness of tube is 1. 5mm. Built to last: 300-micron mesh that will not wrinkle or damage easily; Frame made from firm stainless steel for strength and longevity; Will resist rust, heat, corrosion, and pressure; Enables easier sterilization prior to brewing and easy cleanup. Easy storage: 2 kettle hanging hooks on top end of basket offers stability, user-friendliness, and versatility; Easier than beer cloth hops bags to remove, and sanitize; Care of this hops spider is easy - you can put in the dishwasher as a separate load with no soap, clean, or simply use a garden hose to wash it out; A no-rinse cleaner and sponge after you rinse it off also works.

Filter more: filter has a 14-inch height and 6-inch diameter 35.

More information about OneBom #ad


Similar products



NY Brew Supply W3850-CV Super Efficient 3/8 x 50' Copper Wort Chiller

#ad
NY Brew Supply W3850-CV #ad - Use ce20 hose thread adaptor to attach to your sink. Precut 1/2 inch. The thickness of tube is 1. 5mm. Temperature: -20-200℃. With twice the copper of our standard 3/8 chiller, allowing you to simply cut to the desired length of your input & output hoses; High quality brass hose adapter; Stainless steel hose clamps solidify the structure of the chiller, this unit provides faster cooling for larger batches; 12' of vinyl tubing is shipped in 1 continuous piece, and allow for adjustability in the coil spacing and height.

Temperature range from -30 to +150 degrees F. High temp silicone seals. Filter beer, coffee, chillers, and finished beer, resulting in a clearer beer and better taste; suitable for brewing beer, TEA: We love beer, making compost tea, filtering coffee, but what is better than the beverage itself is the satisfaction of creating it; The G.

NY Brew Supply W3850-CV Super Efficient 3/8 x 50' Copper Wort Chiller #ad - Pls use a hose clamp at the top of the tube to prevent the excessive pressure take apart the tube. Worth to get it - all the onebom products tested before pack it to amazon. 2pc beer ball vavle - this 2 piece beer ball valve can be disassembled for quick cleaning and sanitizing. Well made - 304 stainless steel can be used for a long time, more durable & save a lot for qualified material.

Comes with all accessaries - very Handy addition to your brewing kettle, pump or brew system. Built to last: 300-micron mesh that will not wrinkle or damage easily; Frame made from firm stainless steel for strength and longevity; Will resist rust, heat, corrosion, and pressure; Enables easier sterilization prior to brewing and easy cleanup.

More information about NY Brew Supply W3850-CV #ad


Similar products