#ad
Champion Power Equipment 66520 #ad - Capable of passing solid waste up to 9/16 of an inch in diameter, this transfer pump is the perfect solution for moving water quickly and efficiently. Whether you are draining or refilling your swimming pool, removing water from your basement or draining shallow flooded areas, this unit features a self-priming design that holds prime even when it’s not running requires initial priming to operate.

Transport your pump from one job to the next with ease thanks to the foldaway handle and never flat tires in the included wheel kit. Complete setup - everything you need to start pumping - 12-foot intake hose, clamps, 20-foot discharge hose, intake strainer, cam action quick coupler, fittings and adapters just add oil and gas.

Champion 2-Inch Gas-Powered Semi-Trash Water Transfer Pump with Hose and Wheel Kit #ad - Efficient - 158 gallons per minute maximum delivery powered by a 196cc Champion engine with a 09-gallon fuel tank and 06-quart oil capacity. The champion power equipment 66520 2-inch semi-trash Gas-Powered Water Transfer Pump with Hose and Wheel Kit comes with everything you need to start pumping just add oil and gas.

Champion’s reliable 196cc single-cylinder OHV engine has a 09-gallon fuel tank and 06-quart oil capacity recommended 10W-30 and provides plenty of power for you to move water with confidence and efficiency. Buy with confidence - champion support and our nationwide network of service centers will back your purchase up with a 2-year limited warranty and FREE lifetime technical support.

More information about Champion Power Equipment 66520 #ad

Apache 70000504 Round Hole Suction Strainers, Plated Steel, 2"

#ad
Apache 70000504 #ad - Lot of 1 the product is 2 inch stele suction strainer. For use when a foot valve is not required. Strainers helps to prevent or keep pump damaging solids from entering into the pump. The product is manufactured in United states. This product is prohibited from shipping to California. Easy and simple use kit. Plated steel for a rust and crush resistant strainer.

More information about Apache 70000504 #ad


Similar products



Abbott Rubber PVC Discharge Hose Assembly, Blue, 2" Male X Female NPSM, 65 psi Max Pressure, 50' Length, 2" ID

#ad
Abbott Rubber 1147-2000-50 #ad - It is not to be used with petroleum-based products. Industrial hoses transfer or convey air or liquid in hose systems. It has a 2" aluminum male national pipe straight Mechanical NPSM pin lug fitting and a 2" female NPSM pin lug fitting for resistance to corrosion and tarnishing. The product is 2 inch stele suction strainer.

The company, founded in 1953, is headquartered in Elk Grove Village, IL. It has a temperature range of -10 to +150 degrees F and a maximum pressure rating of 65 pounds per square inch psi. This discharge hose is suitable for use in construction, mining, agricultural, and general open-end water discharge applications.

Pvc for corrosion resistance, high strength, and light weight. The hose must be capable of withstanding the minimum and maximum temperatures that occur within the hose system. The homogenous tube and cover will not separate and is made of polyvinyl chloride PVC for corrosion resistance, high strength, and light weight, with a high-tensile polyester yarn reinforcement for strength and durability.

Abbott Rubber PVC Discharge Hose Assembly, Blue, 2" Male X Female NPSM, 65 psi Max Pressure, 50' Length, 2" ID #ad - . This abbott rubber hose is a 50' discharge hose for a water pump. Some applications require specialized oils or chemicals to be conveyed through the system. 2" aluminum male npsm pin lug fitting and 2" female NPSM pin lug fitting for resistance to corrosion and tarnishing. The product is manufactured in United states.

More information about Abbott Rubber 1147-2000-50 #ad


Similar products



Apache 98138045 2" x 50' Blue PVC Lay-Flat Discharge Hose with Aluminum Pin Lug Fittings

#ad
Apache 98138045-ECOM #ad - High-tensile polyester yarn reinforcement for strength and durability. A blue pvc discharge hose for water, and irrigation industries, construction, this hose is strong, and pumping service in the agricultural, rental, light chemicals, non-water absorbing, lightweight, marine, and mildew-proof, and rolls up flat for easy storage.

. Lightweight hose coils flat for compact storage. The product is 2 inch stele suction strainer. Both tube/cover are extruded simultaneously to obtain maximum bonding. Male x female aluminum short shanks reinforced by Band-It clamps. 2" aluminum male npsm pin lug fitting and 2" female NPSM pin lug fitting for resistance to corrosion and tarnishing.

Apache 98138045 2" x 50' Blue PVC Lay-Flat Discharge Hose with Aluminum Pin Lug Fittings #ad - Construction: the tube/cover are PVC, reinforced with 3-ply polyester yarns, one longitudinal ply and two spiral plies. Resistant to oils, grease, acids, and many chemicals. Rolls up flat for easy storage. This hose is recommended for open-ended discharge; connect it to the discharge side of a pump system only.

Temperature range from -10 to +150 degrees F and maximum pressure rating of 65 psi. Both tube and cover are extruded simultaneously to obtain maximum bonding. Easy and simple use kit.

More information about Apache 98138045-ECOM #ad


Similar products



Female Pin Lug Fitting, Aluminum, 2"

#ad
APACHE 43076000 #ad - Requires gasket to seal. 2, material type: aluminum, working pressure psi: 75, brass, Connector Type: Short shank, Thread Style: Female SIPT The product is 2 inch stele suction strainer.2" aluminum male npsm pin lug fitting and 2" female NPSM pin lug fitting for resistance to corrosion and tarnishing. The product is manufactured in United states.

Hose Diameter in. Resistant to oils, grease, acids, and many chemicals. Rolls up flat for easy storage. Easy and simple use kit. Lightweight hose coils flat for compact storage. For use with hoses handling water or other liquids. Aluminum shanks with brass pin lug nut. Pvc for corrosion resistance, high strength, and light weight.

Female Pin Lug Fitting, Aluminum, 2" #ad - Both tube/cover are extruded simultaneously to obtain maximum bonding. Male x female aluminum short shanks reinforced by Band-It clamps. For use with hoses handling water and other liquids. Temperature range from -10 to +150 degrees F and maximum pressure rating of 65 psi. Aluminum shank with brass NPSM thread pin-lug nut.

More information about APACHE 43076000 #ad


Similar products



Aluminum 2" Camlock Fitting Coupling With Heavy-Duty Plastic Fire Nozzle

#ad
FireHoseDirect A2CLN2PRD #ad - Camlock Material - Aluminum. The pump pressure was approximately 60 psi. Nozzle threads - npsh maximum operating pressure - 100psi approximate gallons per minute GPM - 60 Approximate Distance - 70 feet Positions - Fog, straight stream and offPlastic 2 inch nozzle with NPSH threads attached to a 2 inch aluminum female camlock with NPT threads.

How we conducted our nozzle testing. We used a honda self-priming water pump with a two inch inlet and a two outlet that produces 135 gallons per minute GPM. The product is manufactured in United states. High-tensile polyester yarn reinforcement for strength and durability. The result is the GPM. 2" camlock hose outside diameter of a 2" male camlock is 2 15/32 inches The product is 2 inch stele suction strainer.

Aluminum 2" Camlock Fitting Coupling With Heavy-Duty Plastic Fire Nozzle #ad - Aluminum shanks with brass pin lug nut. 2" aluminum male npsm pin lug fitting and 2" female NPSM pin lug fitting for resistance to corrosion and tarnishing. The nozzle was attached to a fifty foot 2 inch hose. Resistant to oils, grease, acids, and many chemicals. Rolls up flat for easy storage. Pvc for corrosion resistance, high strength, and light weight.

More information about FireHoseDirect A2CLN2PRD #ad


Similar products



2" x 50' Blue PVC Lay-Flat Discharge Hose with Aluminum Camlock C and E Fittings

#ad
Hosetool #ad - Temperature range from -10 to +150 degrees F and maximum pressure rating of 65 psi. Nozzle Material - Plastic. And the hose folds flat and rolls up easily for next time. Nozzle size - 2 inches. Pvc for corrosion resistance, high strength, and light weight. For use with hoses handling water or other liquids. Resistant to oils, grease, acids, and many chemicals.

Rolls up flat for easy storage. Heavy duty pool discharge and backwash hose made of PVC and reinforced with polyester yarn to prevent leaks and tears for durable use. Aluminum camlock c and E connector of this pool hose can prevent oxidation and rust. Direct connection to the pump for easy use, and rolls up flat for easy storage.

2" x 50' Blue PVC Lay-Flat Discharge Hose with Aluminum Camlock C and E Fittings #ad - Length: 50 feet; diameter inches: 2 inch; Working pressure: 90PSI. High pressure resistance, weather and chemical resistant, wear resistant, aging resistant, ideal pool supplies for water transfer. This heavy hose properly cleaned and maintained to keep sanitary all season. Easy and simple use kit. Male x female aluminum short shanks reinforced by Band-It clamps.

Both tube/cover are extruded simultaneously to obtain maximum bonding. Requires gasket to seal.

More information about Hosetool #ad


Similar products



Dixon G200-E-AL Aluminum A380 Global Type E Cam and Groove Hose Fitting, 2" Plug x 2" Hose ID Barbed

#ad
Dixon Valve & Coupling G200-E-AL #ad - High-tensile polyester yarn reinforcement for strength and durability. The product is 2 inch stele suction strainer. This nozzle will only connect to a 2" male camlock hose. It has one male groove adapter end for connecting to female cam couplers and one hose shank end for connecting to hoses Type E. One male groove adapter end for connecting to female cam couplers and one hose shank end for connecting to hoses Type E.

The company, founded in 1916, is based in Chestertown, Maryland. Fittings are available threaded, unthreaded, and come in many shapes, styles, sizes, such as cam and groove, or using another connection standard, and schedules pipe wall thickness. Dixon valve & coupling Company manufactures pipe and hose fittings and accessories.

Dixon G200-E-AL Aluminum A380 Global Type E Cam and Groove Hose Fitting, 2" Plug x 2" Hose ID Barbed #ad - Tube/cover are pvc, reinforced with 3 ply polyester yarns, one longitudinal ply and two spiral plies. Nozzle Material - Plastic. The dixon global type e aluminum a380 cam and groove fitting has a straight body and two openings for connecting two hoses or pipes with cam and groove fittings. The product is manufactured in United states.

Aluminum for resisting corrosion and tarnishing. Nozzle size - 2 inches. Aluminum shanks with brass pin lug nut.

More information about Dixon Valve & Coupling G200-E-AL #ad


Similar products



Apache 43075500 Male Pin Lug Fitting, Aluminum, 2"

#ad
Apache 43075500 #ad - Nozzle size - 2 inches. For use with hoses handling water or other liquids. The product is 2 inch male pin lug coupling. Male x female aluminum short shanks reinforced by Band-It clamps. Temperature range from -10 to +150 degrees F and maximum pressure rating of 65 psi. The product is manufactured in china. Lightweight hose coils flat for compact storage.

High-tensile polyester yarn reinforcement for strength and durability. Requires gasket to seal. 2" aluminum male npsm pin lug fitting and 2" female NPSM pin lug fitting for resistance to corrosion and tarnishing. The product is 2 inch stele suction strainer. Female camlock Size - 2 inches. Resistant to oils, acids, grease, and many chemicals.

Apache 43075500 Male Pin Lug Fitting, Aluminum, 2" #ad - Rolls up flat for easy storage. Easy and simple use kit. Easy and simple use kit. Tube/cover are pvc, reinforced with 3 ply polyester yarns, one longitudinal ply and two spiral plies. One male groove adapter end for connecting to female cam couplers and one hose shank end for connecting to hoses Type E.

More information about Apache 43075500 #ad


Similar products



DIXON VALVE & COUPLING Global Cam & Groove Type A

#ad
DIXON VALVE & COUPLING G200-A-AL #ad - The product is 2 inch male pin lug coupling. Nozzle size - 2 inches. Female camlock Size - 2 inches. Male x female aluminum short shanks reinforced by Band-It clamps. 2" aluminum male npsm pin lug fitting and 2" female NPSM pin lug fitting for resistance to corrosion and tarnishing. Camlock Material - Aluminum.

Nozzle Material - Plastic. Pvc for corrosion resistance, high strength, and light weight. Tube/cover are pvc, reinforced with 3 ply polyester yarns, one longitudinal ply and two spiral plies. Temperature range from -10 to +150 degrees F and maximum pressure rating of 65 psi. Supplier: dixon®material: a380 permanent mold AluminumSize: 2"Maximum Operating Pressure: 250 PSIWeight lb: 0

DIXON VALVE & COUPLING Global Cam & Groove Type A #ad - 36applications: designed for use with liquids, consult dixon for specific recommendationsSpecifications: Designed to interchange with all products produced to A-A-59326DFeatures: Made to Dixon specifications and branded DixonHow it works: To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.

Uncoupling is as quick and simple as coupling. Designed to interchange with all products produced to A-A-59326D. Requires gasket to seal. Aluminum for resisting corrosion and tarnishing. One male groove adapter end for connecting to female cam couplers and one hose shank end for connecting to hoses Type E.

More information about DIXON VALVE & COUPLING G200-A-AL #ad


Similar products



Dixon G200-C-AL Aluminum A380 Global Type C Cam and Groove Hose Fitting, 2" Socket x 2" Hose ID Barbed

#ad
Dixon Valve & Coupling G200-C-AL #ad - Resistant to oils, acids, grease, and many chemicals. Rolls up flat for easy storage. The dixon global type c aluminum a380 cam and groove fitting has a straight body and two openings for connecting two hoses or pipes with cam and groove fittings. Nozzle size - 2 inches. The product is manufactured in United states.

One male groove adapter end for connecting to female cam couplers and one hose shank end for connecting to hoses Type E. Easy and simple use kit. Aluminum for resisting corrosion and tarnishing. The company, founded in 1916, is based in Chestertown, Maryland. Temperature range from -10 to +150 degrees F and maximum pressure rating of 65 psi.

Dixon G200-C-AL Aluminum A380 Global Type C Cam and Groove Hose Fitting, 2" Socket x 2" Hose ID Barbed #ad - Tube/cover are pvc, reinforced with 3 ply polyester yarns, one longitudinal ply and two spiral plies. Lightweight hose coils flat for compact storage. It has one female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses Type C. This nozzle will only connect to a 2" male camlock hose.

Pvc for corrosion resistance, high strength, and light weight. Camlock Material - Aluminum. The product is 2 inch male pin lug coupling.

More information about Dixon Valve & Coupling G200-C-AL #ad


Similar products