#ad
CHUGGER PUMP #ad - Head needs to be flooded w/ Liquid Prior To Being Turned On. Etl-certified; usfda food compliant materials; ul recognized; sturdy 115-volt 50/60HZ Booster Pump With 55" Electric Cord with plug; Non-Submersible; Comparable to March 815-SS-Beer Pump. New chugger pump xcpss-ci-1 x-dry with run dry protection is the first pump made by brewers for home brewers like you.

Please check your electrical requirements before placing order. Transfers flow of hot and cold liquids between brewing vessels or kettles; cools Wort Via a Counter-Flow Chiller; Recirculates Ice Water for Quicker Chilling; Circulator Pump with 316 Stainless Steel Front and Rear Housing; Made by Brewers for Brewers.

CHUGGER PUMP XCPSS-CI-1 X-DRY with Run Dry Protection, SS 115 Volt Center Home Brewing System Beer Pump, 55" Cord w/Plug, 3/4" x 1/2" MPT Connections, ETL-Certified, US FDA Food Compliant Materials #ad - Light enough to be portable; high-quality stainless steel pump head eliminates Stripped Threads; Head is Interchangeable with Existing March Pump Motors; Magnetic Drive with Base, Clear Silicone O-Ring, Teflon Thrust Washer, and Ryton/Teflon Impeller. Max flow rate of 7 gpm 26. 5 lpm; 18. 6-feet 4. 1m of max head to handle back-pressure; Device is Capable of Handling Liquids of Different Temperatures Up to 250 Degrees F.

. Same pump as the cpss-ci-1 but with FDA Approved Run Dry Carbon Bearing Material. Must be wired by an electrician.

More information about CHUGGER PUMP #ad

1/2" FPT TO 1/2" BARB - Stainless Steel

#ad
Home Brew Stuff H618B #ad - If you are not using a qd set or a ball Valve, this is a handy piece of Stainless for a direct connection. 1/2" fpt on one side, with a 1/2" barb on the other. Plastic construction. Use this fitting for connecting tubing directly to your pump. Works with 1/2 inch. 1/2fpt on one side, with a 1/2Barb on the other.

More information about Home Brew Stuff H618B #ad


Similar products



Midwest Homebrewing and Winemaking Supplies PRECUT 1/2" ID Silicone Tubing - 10 ft.

#ad
Midwest Homebrewing and Winemaking Supplies HOZQ8-1135 #ad - Works with 1/2 inch. 1/2fpt on one side, with a 1/2Barb on the other. Feature: 10 ft. High temp tubing. Precut 1/2 inch. Precut 1/2 inch iD silicone tubing - 10 ft. Precut 1/2 inch id silicone tubing, feature: 10 ft. High Temp tubing. Precut 1/2 inch iD silicone tubing - 10 ft. Country of origin - united States, manufacturer name - Midwest home brewing and winemaking supplies.

Plastic construction.

More information about Midwest Homebrewing and Winemaking Supplies HOZQ8-1135 #ad


Similar products



CONCORD 304 Stainless Steel 1/2" Barb Hose to 1/2" NPT Home Brew Fitting. 2 Pack

#ad
Concord Cookware #ad - Precut 1/2 inch. Great for attaching 1/2" inner diameter hose. Feature: 10 ft. High temp tubing. Works with 1/2 inch. 304 grade stainless Steel. 1/2" barb to 1/2" NPT fitting. 1/2fpt on one side, with a 1/2Barb on the other. 1/2" npt male fitting. High Grade. You get 2 units per pack. Size: 1/2" barb end to 1/2" NPT Male End Plastic construction.

More information about Concord Cookware #ad


Similar products



CONCORD 304 Stainless Steel 1/2" NPT to 1/2" NPT Hex Nipple Home Brew. 2 Pack

#ad
Concord Cookware #ad - Feature: 10 ft. High temp tubing. 304 grade stainless Steel. You get 2 units per pack. Perfect for any home brewing application. Precut 1/2 inch. 1/2" npt male fitting. Great for attaching 1/2" inner diameter hose. 1. 6" in length. 1/2" barb to 1/2" NPT fitting. 1/2fpt on one side, with a 1/2Barb on the other. Size: 1/2" npt to 1/2" nPT Plastic construction.

1/2" npt to 1/2" npt hex Nipple. High Grade. High Grade. Works with 1/2 inch. You get 2 units per pack. 304 grade stainless Steel.

More information about Concord Cookware #ad


Similar products



Leviton 4720-C, Black-White

#ad
Leviton 4720-C #ad - Perfect for any home brewing application. You get 2 units per pack. Solid brass blades and contacts Feature Improved Conductivity, Low Resistance, Low Heat, and Long Life. Internal wiring chambers isolate Individual Conductors to Prevent Flashover, Arcing, and Stray Strands of Wire. Great for attaching 1/2" inner diameter hose.

. 304 grade stainless Steel. 1/2fpt on one side, with a 1/2Barb on the other. Nema and non-nemA Configurations Available. High Grade. 1/2" npt male fitting. High Grade. 700 wire gauge: 18-10 awg black and white industrial grade locking plug grounding l5-15p nema locking connector 1063-2057 Duplex flush receptacle 1050-0163 Single flush receptacle 1050-0171 Solid brass blades and contacts Zinc plated steel assembly screws Super tough nylon body material Plastic construction.

Leviton 4720-C, Black-White #ad - Feature: 10 ft. High temp tubing. You get 2 units per pack. Works with 1/2 inch. Super tough nylon body Resists Damage From Severe Impact, Abrasion and Chemicals. Ul listed, csa certified, NOM Certified.

More information about Leviton 4720-C #ad


Similar products



Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1200W

#ad
Inkbird Tech COMINHKPR111236 #ad - 1. 6" in length. High Grade. Solid brass blades and contacts Feature Improved Conductivity, Low Resistance, Low Heat, and Long Life. Internal wiring chambers isolate Individual Conductors to Prevent Flashover, Arcing, and Stray Strands of Wire. Ul listed, csa certified, NOM Certified. 304 grade stainless Steel. Feature: 10 ft.

High temp tubing. Specification: temperature control range: -50~120°C / -58~248°F Temperature Resolution: 01°c / 01°f temperature accuracy: ±1°c -50~70°c / ±2°f -58~160°f temperature control mode :on/off control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max.

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1200W #ad - You get 2 units per pack. Nema and non-nemA Configurations Available. 1/2" barb to 1/2" NPT fitting. It is with temperature calibration and compressor delay which can protect your refrigeration. Perfect for any home brewing application. 1/2fpt on one side, with a 1/2Barb on the other. 1/2" npt to 1/2" npt hex Nipple.

You get 2 units per pack.

More information about Inkbird Tech COMINHKPR111236 #ad


Similar products



ProMaker 2 Pack Stainless Steel Male Quick Disconnect FPT 1/2" Home Brew Fitting Connector Homebrewing MPT Male

#ad
#ad - High Grade. You get 2 units per pack. Brewing tool:perfect for Brewing Applications, connector can be Combinated to suitable for your use. It is with temperature calibration and compressor delay which can protect your refrigeration. High quality:made from Stainless Steel 304, heavy duty and last for a long time.

. 1. 6" in length. Material: 304 stainless steel connector type:stainless QD1/2"MPT Fit any other machine need 1/2 male threaded to connect Plastic construction. 1/2" barb to 1/2" NPT fitting. Perfect effect::the quick disconnect will hold pressure for brewing applications when moving liquids at 60PSI or less.

ProMaker 2 Pack Stainless Steel Male Quick Disconnect FPT 1/2" Home Brew Fitting Connector Homebrewing MPT Male #ad - You get 2 units per pack. Works with 1/2 inch. Solid brass blades and contacts Feature Improved Conductivity, Low Heat, Low Resistance, and Long Life. Internal wiring chambers isolate Individual Conductors to Prevent Flashover, Arcing, and Stray Strands of Wire. Ul listed, csa certified, NOM Certified. Support °C/°F display.

X1f947;🥇【dual relay output】be able to connect with refrigeration and heating equipment at the same time. X1f947;🥇【dual display window】Be able to display measured temperature and set temperature at the same time.

More information about #ad


Similar products



DERNORD Sanitary Sample Valve 1.5" Tri Clamp Ferrule OD 50.5MM with Elliptic Handle

#ad
DERNORD #ad - Connection: 1. 5" tri clamp: Ferrule OD 505mm. Body material: Stainless Steel 304. Ul listed, csa certified, NOM Certified. Feature: 10 ft. High temp tubing. You get 2 units per pack. You get 2 units per pack. Super tough nylon body Resists Damage From Severe Impact, Abrasion and Chemicals. Works with 1/2 inch. The dernord sample valves are used in piping systems or on tanks for sampling.

It has a maximum operating pressure rating 150 psi depending on the valve size at 70 degrees F ambient temperature. 304 grade stainless Steel. 1/2fpt on one side, with a 1/2Barb on the other. X1f947;🥇【convenient design】plug and play, easy to use. Solid brass blades and contacts Feature Improved Conductivity, Low Resistance, Low Heat, and Long Life.

DERNORD Sanitary Sample Valve 1.5" Tri Clamp Ferrule OD 50.5MM with Elliptic Handle #ad - Internal wiring chambers isolate Individual Conductors to Prevent Flashover, Arcing, and Stray Strands of Wire. Support °C/°F display. X1f947;🥇【dual relay output】be able to connect with refrigeration and heating equipment at the same time. X1f947;🥇【dual display window】Be able to display measured temperature and set temperature at the same time.

X1f947;🥇【buzzer alarm】high and low temperature alarms are available when the temperature is over or the sensor is with issue.

More information about DERNORD #ad


Similar products



Saniclean- 32 oz.

#ad
Midwest Homebrewing and Winemaking Supplies 8D-ESWW-S1HF #ad - 304 grade stainless Steel. Saniclean requires a contact time of 2-3 minutes. You get 2 units per pack. 1/2" barb to 1/2" NPT fitting. Convienient use:Barbed retracting locks for easy slide-back connecting and disconnecting. Perfect for any home brewing application. Body material: Stainless Steel 304. High Grade. Support °C/°F display.

X1f947;🥇【dual relay output】be able to connect with refrigeration and heating equipment at the same time. X1f947;🥇【dual display window】Be able to display measured temperature and set temperature at the same time. X1f947;🥇【buzzer alarm】high and low temperature alarms are available when the temperature is over or the sensor is with issue.

Saniclean- 32 oz. #ad - X1f947;🥇【safety】maximum output load: 1100W110V. Feature: 10 ft. High temp tubing. Package:2 x 1/2" stainless Steel Quick Disconnect Fitting NPT. Plastic construction. Ul listed, csa certified, NOM Certified. Combined with 1. 5 inch tri clamp silicone gasket not included, available with clamp ends.

More information about Midwest Homebrewing and Winemaking Supplies 8D-ESWW-S1HF #ad


Similar products



Brix Refractometer for Homebrew Beer Wort, iTavah Dual Scale Automatic Temperature Compensation 0-32% Specific Gravity Hydrometer with ATC

#ad
iTavah COMINHKPR121676 #ad - 1/2fpt on one side, with a 1/2Barb on the other. Itavah is the authorized seller. Unauthorized sellers can not offer or guarantee warranty. Each one of itavah dual scale Refractometer comes with a 1-year warranty AND a 45 days money back guarantee. Nema and non-nemA Configurations Available. 2. If you have any issue with your brix refractometer, non-corrosive and non-reactive aluminum material, light-weighted and portable, please do not hesitate to contact us - your satisfaction is paramount!.

Acid based, non-foaming final rinse. 1/2" npt male fitting. 304 grade stainless Steel. X1f947;🥇【convenient design】plug and play, easy to use. Convienient use:Barbed retracting locks for easy slide-back connecting and disconnecting. Connection: 1. 5" tri clamp: Ferrule OD 505mm. 304 grade stainless Steel.

Brix Refractometer for Homebrew Beer Wort, iTavah Dual Scale Automatic Temperature Compensation 0-32% Specific Gravity Hydrometer with ATC #ad - 1/2" npt to 1/2" npt hex Nipple. If you have any issue with your brix refractometer, please do not hesitate to contact us - your satisfaction is paramount! Plastic construction. Dual scale:rapidly and precisely display the brix 0-32% and Specific Gravity 1.

More information about iTavah COMINHKPR121676 #ad


Similar products