Grundfos 59896341 Brute Three Speed 1/25 Horsepower Recirculator Pump

#ad
Grundfos 59896341 #ad - The bearings are lubricated by the pumped liquid. No additional motor protection is required. The pump is of the canned rotor type, i. E. Connection: flange - 2 1/2-Inch Diameter Bolt Holes. The pump is characterized by ceramic shaft and radial bearings, stainless steel rotor can and bearing plate, carbon axial bearing, corrosion-resistant impeller, composite, PES, and cast iron pump housing.

Pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. Maintenance-free, low energy consumption, easy to install, quiet running. Motors: 2 pole, single Phase, 115-Volt. The motor is a 1-phase motor. 1/25 horsepower. Flow range: 0- 17 gpm, head range: 0- 19. 5-feet.

More information about Grundfos 59896341 #ad

Grundfos 519601 3/4-Inch GF 15/26 Cast Iron Flange Set

#ad
Grundfos 519601 #ad - Includes: -includes 2 flanges, 2 gaskets and 4 bolts with nuts. Pump connection GF 15/26. Dimensions: -dimensions: 2'' H x 2'' W x 2'' D. 3/4-inch nPT pipe connection. Includes 2 flanges, 2 gaskets, 2 bolts with nuts. Use with versa Flo UP and UPS pumps. 519601 features: -Flange set. Material: Cast iron. Pump connection: GF 0

58. 075'' npt pipe connection. Fitting is threaded for security.

More information about Grundfos 519601 #ad


Similar products



Grundfos 519602 1-Inch GF 15/26 Cast Iron Flange Set

#ad
Grundfos 519602 #ad - Specs: product specs material: cast iron application: heating type: pump flanges thread type: female connection size: 1" thread size: 1" Connection Type: Threaded IPS Parts Used With: UP 15 Series Pumps Some UP 26 Series Pumps Some UP 43 Series Pumps Some UPS 15 Series Pumps Some Use with versa Flo UP and UPS pumps.

1-inch npT pipe connection. Includes 2 flanges, 2 gaskets, 2 bolts with nuts. Fitting is threaded for security. 2 gaskets. 3/4-inch nPT pipe connection. 2 bolts with nuts. Pump connection GF 15/26. Pump connection: GF 15/26. 2 flanges. Pair of grundfos 1" NPT Circulator Pump Flanges. Includes 2 flanges, 2 gaskets, 4 nuts 4 bolts.

More information about Grundfos 519602 #ad


Similar products



Taco 400-4 1/8-Inch-NPT Float Air Hy-Vent

#ad
Taco 400-4 #ad - Fitting is threaded for security. Maximum Temperature 240F. 2 gaskets. Designed for use on hot water radiators, baseboards, convectors, radiant panels, and small unit heaters with a maximum working pressure of 150 psi. The taco 400 hy-vent can be opened top is threaded on and cleaned. Maximum Pressure 150 psi.

Sturdy Brass Construction. With threaded connections--. 125-inch. 2 bolts with nuts. Includes 2 flanges, 2 gaskets, 2 bolts with nuts. 025-inch, 05-inch and 075-inch --and operating pressure ratings up to 150 psi, these brass-body, nickel-plated vents meet the system requirements of even your largest installations.

Taco 400-4 1/8-Inch-NPT Float Air Hy-Vent #ad - Pump connection: GF 15/26. 2 flanges. Pump connection GF 15/26. The high-capacity, float-style vent can be placed either on the boiler or at the high points throughout the system. 1-inch npT pipe connection. Use with versa Flo UP and UPS pumps.

More information about Taco 400-4 #ad


Similar products



Grundfos 59896155 1/25 Horsepower SuperBrute Recirculator Pump

#ad
Grundfos 59896155 #ad - 3/4-inch nPT pipe connection. Sturdy Brass Construction. Maximum Pressure 150 psi. Specifications: -Power consumption: 25watts. Voltage: 115 volts. Maintenance-free, easy to install, low energy consumption, quiet running. Maximum Temperature 240F. 2 bolts with nuts. 2 pole, single phase, 115-volt motors. Includes: -2 Gaskets Included.

Up1542f features: -Recirculator pump. Material: bronze and stainless steel. Aluminum stator housing. Stainless steel spherical separator. Stainless steel / tungsten carbide rotor. Stainless steel, ptfe, pu, epdm, graphite rotor and impeller. Brass ms 58 pump housing. Ppo isolation valve. Pa66/6 terminal box cover, motor cover.

Grundfos 59896155 1/25 Horsepower SuperBrute Recirculator Pump #ad - Lexan light. Pvc cable, cable relief. Epp 55 insulating cover. Epdm o'rings. Pom check valve.

More information about Grundfos 59896155 #ad


Similar products



Grundfos 595444 3/4-Inch Clip-On Aquastat Control

#ad
Grundfos 595444 #ad - Mounts on pipe. 3/4-inch. Maximum Temperature 240F. Grundfos 595444 - 3/4" clip-on aquastat kit for up series Circulators, 85-105F Use with versa Flo UP and UPS pumps. 2 flanges. Pump connection GF 15/26. Flow range: 0- 15. 5 us gpm, head range from 1 to 15-feet. Pump connection: GF 15/26. 2 pole, single phase, 115-volt motors.

85 - 105 degrees F. 2 gaskets. Maximum Pressure 150 psi. 2 bolts with nuts. Designed for use on hot water radiators, convectors, baseboards, radiant panels, and small unit heaters with a maximum working pressure of 150 psi. The taco 400 hy-vent can be opened top is threaded on and cleaned. Sturdy cast iron housing.

Grundfos 595444 3/4-Inch Clip-On Aquastat Control #ad - 3/4-inch nPT pipe connection. Fitting is threaded for security. 1-inch npT pipe connection. Sturdy Brass Construction. May be used with timer. Maintenance-free, low energy consumption, easy to install, quiet running.

More information about Grundfos 595444 #ad


Similar products



AMTROL EX-15 15 Extrol Expansion Tank

#ad
AMTROL EX-15 #ad - Maintenance-free, low energy consumption, easy to install, quiet running. Aquastat kit. Fitting is threaded for security. Includes 2 flanges, 2 gaskets, 2 bolts with nuts. Factory precharge: 12 psig max. Pump connection GF 15/26. 2 gaskets. Sturdy Brass Construction. Designed and patented the first Extol diaphragm expansion tank in 1954 to control system pressure and help reduce energy consumption in heating and chilled water systems.

Pump connection: GF 15/26. May be used with timer. Amtrak Inc. Maximum Pressure 150 psi. 1-inch npT pipe connection. Designed for use on hot water radiators, convectors, baseboards, radiant panels, and small unit heaters with a maximum working pressure of 150 psi. The taco 400 hy-vent can be opened top is threaded on and cleaned.

AMTROL EX-15 15 Extrol Expansion Tank #ad - Sturdy cast iron housing. Not for potable water, for use with closed hydronic heating and cooling systems. Operating temperature: 240 degrees F. Flow range: 0- 15. 5 us gpm, head range from 1 to 15-feet.

More information about AMTROL EX-15 #ad


Similar products



AMTROL EX-30 30 Extrol Expansion Tank

#ad
AMTROL Amtrol 102-1 #30 #ad - Watertight reservoir for expanded water. 2 bolts with nuts. Maximum Temperature 240F. 3/4-inch. Sealed air cushion - factory pre-charged and 100% tested. 2 flanges. Working pressure: 100 psig Max. Thick, heavy duty Butyl/EPDM diaphragm for long service life. 85 - 105 degrees F. Strong, deep-drawn steel tank. Over six decades later, extrol is still the world's leading expansion Use with versa Flo UP and UPS pumps.

Amtrol Inc. Maximum Pressure 150 psi. Pump connection: GF 15/26. Includes 2 flanges, 2 gaskets, 2 bolts with nuts. 2 gallon capacity note: larger size is Amtrol EX-30 Operating temperature: 240 degrees F. Designed for use on hot water radiators, radiant panels, convectors, baseboards, and small unit heaters with a maximum working pressure of 150 psi.

AMTROL EX-30 30 Extrol Expansion Tank #ad - The taco 400 hy-vent can be opened top is threaded on and cleaned. Sturdy cast iron housing. Pump connection GF 15/26. Inline well tank. Sturdy Brass Construction.

More information about AMTROL Amtrol 102-1 #30 #ad


Similar products



Grundfos 519603 1-1/4-Inch GF 15/26 Cast Iron Flange Set

#ad
Grundfos 519603 #ad - Thick, heavy duty Butyl/EPDM diaphragm for long service life. 2 flanges. Working pressure: 100 psig Max. 2 bolts with nuts. Sturdy Brass Construction. Fitting is threaded for security. Sealed air cushion - factory pre-charged and 100% tested. Not for potable water, for use with closed hydronic heating and cooling systems.

2 pole, single phase, 115-volt motors. Mounts on pipe. Watertight reservoir for expanded water. Two 3/4-inch bolt holes flanges not included. Pump connection: GF 15/26. Pump connection GF 15/26. Thick, heavy duty Butyl/EPDM diaphragm for long service life. 3/4-inch nPT pipe connection. 2 gaskets. 85 - 105 degrees F. Flanged connection for use with cast iron pumps.

Grundfos 519603 1-1/4-Inch GF 15/26 Cast Iron Flange Set #ad - Maximum Pressure 150 psi. Operating temperature: 240 degrees F. Watertight reservoir for expanded water. 3/4-inch.

More information about Grundfos 519603 #ad


Similar products



Grundfos 595656 1/2-Inch Clip-On Aquastat Control

#ad
Grundfos 595656 #ad - Watertight reservoir for expanded water. 2 gallon capacity note: larger size is Amtrol EX-302 flanges. 2 bolts with nuts. 1-inch npT pipe connection. 2 gaskets. Not for potable water, for use with closed hydronic heating and cooling systems. Working pressure: 100 psig Max. Designed for use on hot water radiators, convectors, radiant panels, baseboards, and small unit heaters with a maximum working pressure of 150 psi.

The taco 400 hy-vent can be opened top is threaded on and cleaned. Sturdy cast iron housing. Sealed air cushion - factory pre-charged and 100% tested. 2 gaskets. Operating temperature: 240 degrees F. Two 3/4-inch bolt holes flanges not included. May be used with timer. 1-inch. May be used with timer. 2 bolts with nuts.

Grundfos 595656 1/2-Inch Clip-On Aquastat Control #ad - Pump connection GF 15/26. 2 pole, single phase, 115-volt motors. Mounts on pipe.

More information about Grundfos 595656 #ad


Similar products



Apollo Valve 10-400 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 3/4" NPT Male x Female

#ad
Conbraco 1040705 #ad - Sealed air cushion - factory pre-charged and 100% tested. 3/4-inch nPT pipe connection. Use with versa Flo UP and UPS pumps. 2 flanges. 1-inch npT pipe connection. Pump connection: GF 15/26. Designed for use on hot water radiators, radiant panels, baseboards, convectors, and small unit heaters with a maximum working pressure of 150 psi.

The taco 400 hy-vent can be opened top is threaded on and cleaned. Sturdy cast iron housing. Factory precharge: 12 psig max. Sturdy Brass Construction. 2 bolts with nuts. This apollo valve 10-400 series safety relief valve has a bronze body, a 3/4" male National Pipe Thread NPT inlet connection, a 30 pounds per square inch psi relief pressure, and a 3/4" female NPT outlet.

Apollo Valve 10-400 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 3/4" NPT Male x Female #ad - Operating temperature: 240 degrees F. 85 - 105 degrees F. Fitting is threaded for security. Mounts on pipe. Watertight reservoir for expanded water. May be used with timer. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates.

More information about Conbraco 1040705 #ad


Similar products