#ad
LANCHEZ #ad - Specification iutput power: 1-1/4 hp output power: 3/4 hp nominal voltage: 115V/60HZ Max height: 31 feet Max Flow: 4171 GPH Max. Automatic float switch: the stainless steel sewage pump with a float switch allows automatic operation and lowest pump sucking level is 45mm1. 77inch. Clean / dirty water: higher base plate and 1-1/4" solid is allowed to pass.

This dirty water pump with a high base plate can pass up to 1-1/4 inch grains and solids. The water pump can be connected to a 1 inch, 1-1/4 inch or 1-1/2 inch hose with the hose adapter. Submersible depth: 17 feet Max grain size: 1-1/4 inch Max pressure: 13. 05 psi length of cable: 25 feet max fluid temperature: 95 ℉ diameter of pipe: npt 1", npt 1-1/4", npt 1-1/2" package includes 1 x Submersible sump pump 1 x hose adapter 2 x detailed manual instructions Performance: 3/4 hp; flow rate to 4171 gallons per hour; Lifting water up to 31ft.

So just simply cut the hose adapter to the desired size. Application occasions the submersible sump pump with stainless steel housing is recommended for use in basins or householdwater lift, such as cellar, reservoir, farm, is suitable for pumping dirty water from any enclosed environment, flooded basement, garden, swimming pool, pond and more.

Lanchez Q900B54RM 3/4 HP Submersible Sump Pump Stainless Steel Sewage Pump With Float Switch for Dirty Water Pool Pond Flood #ad - The 25-feet cable allows you to connect to your power conveniently. The body is well sealed for long time use and can stay submersed under water. Product details lanchez 3/4 hp multi-purpose stainless Steel Submersible Sump Pump comes with a rugged corrosion-resistant stainless steel body, a 25 feet power cord, a hose adapter.

More information about LANCHEZ #ad

WAYNE 66000-WYN1 1-1/2 in. by 24 ft. Sump Discharge Hose Kit With Clamps

#ad
Wayne Pumps 66000-WYN1 #ad - The wayne 1-1/2-inch-by-24-foot sump discharge hose kit with clamps can be used with all sump pumps that have a 1-1/2-inch discharge tapping. Sump discharge hose kit. It's sectioned at every eight feet for easy cutting to the desired length, with a threaded male adapter and hose clamp for mounting to the pump.

Sectioned every 8 feet for fast cutting. Includes threaded male adapter and hose clamp. Compatible with all sump pumps with 1-1/2-inch discharge tapping.

More information about Wayne Pumps 66000-WYN1 #ad


Similar products