#ad
DDWT #ad - Inlet hose should not exceed 9ft 2. 75m. Mount and start drill. 2. 3. Pump depends on fluid being pumped for lubrication. To ensure optimum priming and long life, apply a few drops of lubricating oil in pump inlet prior to each use and flush with clean water after each use. 6. Be sure inlet hose is airtight and as short as possible.

Watch inlet tubing to be certain fluid is drawn into pump in15-20 seconds. 5. When pumping abrasive fluids or liquids with solids, longer pump life will be obtained by using a strainer on the inlet line. Package included: 1 x drill pump 2 x hose clamps this self priming drill pump is designed to work with a corded or cordless drill, fits most electric drills;Converts virtually any drill into a high capacity pump capable of emptying sinks, aquariums, pool skimmers and much more.

Portable Electric Drill Pump Self Priming Transfer Pump Oil Fluid Water Pump #ad - Small size, light weight and portable, convenient installation;this electric drill powered pump is suitable for home, garden and outdoor. Ideal for transferring light liquids, dilute organic solvents, such as fresh water, sea water, oil, insecticides and liquid fertilisers. Engineering plastic body and stainless steel internal parts avoid corrosion.

It is recommended that the pump is mounted to a surface for security and ease of use. Note: do not run pump in reverse. If not, check that inlet tube is properly mounted to inlet.

More information about DDWT #ad

Duda Energy LPpvc050-025ft 25' x 1/2 Id Low Pressure Clear Flexible PVC Tubing Heavy Duty UV Chemical Resistant Vinyl Hose

#ad
Duda Energy LPpvc050-025ft #ad - Max working pressure: 20 psi, bursting pressure: 60, minimum bend radius: 2-3/4 inch. For industrial use only. Id: 1/2, od: 5/8'', wall thickness: 1/16''. Firmness: 67a soft, uv-resistant, color: clear-transparent, single line PVC. Low pressure/clear PVC. Temperature range: 25°f to 150°f -4°c to 66°c. This pvc tubing may not be used with food products or drinking applications.

Pvc tubing is a polyvinyl chloride plastic with plasticizers to make it more flexible and transparent. The duda energy braided PVC tubing works excellent in many fluid applications where general chemical resistivity is required.

More information about Duda Energy LPpvc050-025ft #ad


Similar products



1/2" x 10' - Valterra W01-1600PB Clear Vinyl Tubing

#ad
Valterra W01-1600PB #ad - Temperature range: 25°f to 150°f -4°c to 66°c. 1/2" i. D. Valterra's clear vinyl Tubing is flexible, non-toxic, and resistant to corrosion. Id: 1/2, od: 5/8'', wall thickness: 1/16''. Flexible, non-toxic. Nsf-listed materials. X 10' length. Since 1981, pool & spa, llc, has been a leading supplier of brand name product lines to the RV, Valterra Products, and Plumbing industries.

X 10' length. Max working pressure: 20 psi, bursting pressure: 60, minimum bend radius: 2-3/4 inch. 1/2" i. D. Resistant to corrosion. Firmness: 67a soft, uv-resistant, color: clear-transparent, single line PVC. Low pressure/clear PVC.

More information about Valterra W01-1600PB #ad


Similar products



Flotec FPDMP21SA-P2 Self Priming Drill Pump

#ad
Flotec FPDMP21SA-P2 #ad - Can not be used for GAS. X 10' length. Firmness: 67a soft, uv-resistant, color: clear-transparent, single line PVC. Low pressure/clear PVC. Pumps up to 225 GPH. Resistant to corrosion. Can be used to change the oil in a lawn mower or boat. Nsf-listed materials. 1/2" i. D. Minimum drill speed 1200 RPM. Flexible, non-toxic.

Id: 1/2, od: 5/8'', wall thickness: 1/16''. Max working pressure: 20 psi, bursting pressure: 60, minimum bend radius: 2-3/4 inch. Temperature range: 25°f to 150°f -4°c to 66°c.

More information about Flotec FPDMP21SA-P2 #ad


Similar products



ECO-FLO Products PUP62 Water Transfer Drill Pump Kit, 300 GPH

#ad
Eco Flo SUP54 #ad - 1/2" i. D. Id: 1/2, od: 5/8'', wall thickness: 1/16''. Resistant to corrosion. Nsf-listed materials. Temperature range: 25°f to 150°f -4°c to 66°c. Can not be used for GAS. X 10' length. Max working pressure: 20 psi, bursting pressure: 60, minimum bend radius: 2-3/4 inch. The eco-flo commitment is to produce pumps for the long term at the best value.

Firmness: 67a soft, uv-resistant, color: clear-transparent, single line PVC. Low pressure/clear PVC. Pumps up to 225 GPH. Ideal for transferring water from one source to another. Test laboratory and iso 9000 facility account for quality built pumps that are all CSA approved. Minimum drill speed 1200 RPM. Can be used to change the oil in a lawn mower or boat.

ECO-FLO Products PUP62 Water Transfer Drill Pump Kit, 300 GPH #ad - Eco-flo products exceed the competition in flow and head performance. Great for numerous de-watering jobs around the home such as stopped up sinks, aquariums, water beds, tanks, etc. Draining oil from engine sumps. Download the user manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information.

Click on the eco-flo products link at the top of this page to see more pump options from ECO-FLO Products.

More information about Eco Flo SUP54 #ad


Similar products



Rollerflex Food Grade Crystal Clear Vinyl Tubing, 1/2-Inch ID x 5/8-Inch OD, 10-FT

#ad
Rollerflex #ad - Download the user manual under the Technical Specification section of this page for safety, troubleshooting, installation, and warranty information. Click on the eco-flo products link at the top of this page to see more pump options from ECO-FLO Products. Usda approved for meat and poultry plants. High quality, flexible pVC compound in compliance with FDA and 3A Sanitary Standards.

Nsf-listed materials. Flexible, non-toxic. Id: 1/2, od: 5/8'', wall thickness: 1/16''. The smooth inner surface allows for easy flow and easy cleaning. Can not be used for GAS. Great for numerous de-watering jobs around the home such as stopped up sinks, tanks, aquariums, water beds, etc. Draining oil from engine sumps.

Rollerflex Food Grade Crystal Clear Vinyl Tubing, 1/2-Inch ID x 5/8-Inch OD, 10-FT #ad - Smooth inner surface for easy flow and easy cleaning. Ideal for transferring water from one source to another. Can be used to change the oil in a lawn mower or boat. 1/2" id x 5/8" od x 10' pre-cut pvc flexible plastic tubing. Resistant to corrosion.

More information about Rollerflex #ad


Similar products



Self Priming Transfer Pump - Milescraft 1314 DrillPump750

#ad
Milescraft 1314 #ad - Bpa free and Non-Toxic. Pumps up to 225 GPH. When using, the drill should be set to run forward, turning the pump in a clockwise direction. The unit pumps up to 750 gallons per hour and is self-priming up to 12 feet. Resistant to corrosion. Self-priming up to 12 feet. Nsf-listed materials. Unit pumps up to 750 gallons per hour.

Usda approved for meat and poultry plants. Uses include: food and beverage handling, water gardens and ponds, processing and dispensing lines, wine making, pumping and more. Drill pump must be mounted for proper usage, do not hold in hand. Never run the DrillPump in reverse. To apply, unscrew the side and put a bit of grease on the housing where the rubber fan blades touch, then reassemble.

Self Priming Transfer Pump - Milescraft 1314 DrillPump750 #ad - Great for numerous de-watering jobs around the home such as stopped up sinks, water beds, aquariums, tanks, etc. Draining oil from engine sumps. All branches of the food industry, water mains and water feeds; beer brewing, as airline hose for aquariums, medical and laboratories where see-through flow of gas or liquids are essential.

Other uses include general industrial application for the conveyance of liquids, gases and solids of suitable granular size, alkalis, chemicals, such as factory air lines automation machinery and pneumatic lines. The tubing provides excellent resistance to acids, chemicals and solvents.

More information about Milescraft 1314 #ad


Similar products



Double Headed Sheet Metal Nibbler, REXBETI Drill Attachment Metal Cutter with Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit, Perfect for Straight Curve and Circle Cutting gold

#ad
REXBETI #ad - Ideal for transferring water from one source to another. Never run the DrillPump in reverse. Firmness: 67a soft, uv-resistant, color: clear-transparent, single line PVC. Low pressure/clear PVC. The 360 degree adjustable cutting head allows easy control and has no problem handling any curve or straight you throw to it.

Cutting sheet metals will never be the same with REXBETI ultimate nibbler. Download the user manual under the Technical Specification section of this page for safety, troubleshooting, installation, and warranty information. Click on the eco-flo products link at the top of this page to see more pump options from ECO-FLO Products.

. Flexible, non-toxic. Nsf-listed materials. Great for numerous de-watering jobs around the home such as stopped up sinks, aquariums, tanks, water beds, etc. Draining oil from engine sumps. Hss cutting blades to cut including but not limited to: Sheet metal, complex profiles, aluminium, copper, powder coated material, formica, pipes, corrugated material, plastic, stainless steel, fibreglass.

Double Headed Sheet Metal Nibbler, REXBETI Drill Attachment Metal Cutter with Extra Punch and Die, 1 Cutting Hole Accessory and 1 Step Drill Bit, Perfect for Straight Curve and Circle Cutting gold #ad - Fits any drill that works between 1500-3000 RPM, More easy and powerful than normal shears and snips. Unit pumps up to 750 gallons per hour. All branches of the food industry, as airline hose for aquariums, water mains and water feeds; beer brewing, medical and laboratories where see-through flow of gas or liquids are essential.

More information about REXBETI #ad


Similar products



Milescraft 1313 DrillPump300 - Self Priming Transfer Pump

#ad
Milescraft 1313 #ad - Resistant to corrosion. Max working pressure: 20 psi, bursting pressure: 60, minimum bend radius: 2-3/4 inch. Unit pumps up to 750 gallons per hour. Hose connection is 1/2 inch and uses any 1/2 inch hose. Easy and fast to cut 14 gauge material and creates a precision, burr free edge. Self-priming up to 12 feet.

When using, the drill should be set to run forward, turning the pump in a clockwise direction. Never run the DrillPump in reverse. The 3/8” shank on this unit fits all common chucks for most drills. The hose connection is 1/2” and uses any 1/2” hose. The unit pumps up to 300 gallons per hour and is self-priming up to 9 feet.

Milescraft 1313 DrillPump300 - Self Priming Transfer Pump #ad - Download the user manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information. Click on the eco-flo products link at the top of this page to see more pump options from ECO-FLO Products. Temperature range: 25°f to 150°f -4°c to 66°c.

3/4″ hose connection, for use with standard garden hose. See instructions below. Pumps up to 225 GPH. 3/8" shank on this unit fits all common chucks.

More information about Milescraft 1313 #ad


Similar products