Ridgerock Tools Inc. 50635 - Dependable service: inline surface clear water pump provides a reliable method for transferring water in both residential and commercial applications. Cast iron pump body, brass impeller w/ radial peripheral blades, stainless steel mechanical seal, #4 steel iron shaft make for a heavy duty pump that stays put even in windy outdoor conditions.

Single phase motor is thermally protected against overloads using a thermal device overload cutout fitted in the winding. Hmax 8m; uses 1-1/2" pipe, Hmax 18m, 4. 3 ft. Ideal for ponds, large aquariums, gardening, rain barrels, sprinkling systems, use in agriculture settings, pools, flow irrigation systems, shallow and deep water wells.

Tooluxe 50635 Electric Centrifugal Clear Water Pump, 0.5 HP | Pools, Ponds, Irrigation, Garden, Sprinkling | 380 GPH - Other specs: qmax 24l/min, suct. Input/output: includes a one-inch inlet port and-one inch outlet port, 370W input power and 220W output power. Provides a steady flow: Stainless steel mechanical seal and heavy-duty impeller. Power cable. Heavy-duty centrifugal pump: Non-submersible electric water pump designed to transfer water from tanks, pools, rain barrels, and ground water.

Sturdy cast iron construction: Built for outdoor use, compact and easy to place body is made of cast iron that stays put even under windy conditions. High quality 1/2 hp electric centrifugal clear water pump, 3a motor non-submersible 110v 2-pole induction, 110 volt, Input power: 370W, 60 Hz, Max suct lift:8m, Max capacity:36L/min, 1/2 HP, Output power: 220W, single phase .

More information about Ridgerock Tools Inc. 50635

Superior Pump 99555 Plastic Universal Check Valve Kit for 1-1/4-Inch & 1-1/2-Inch MPT & FPT

Superior Pump 99555 - Thread sealant or tape is recommended to be used when installed. The mechanics of check valve operation are not complicated. Check valves are mechanical valves that permit liquids to flow in only one direction, preventing process flow from reversing. High quality nitril-bruna N seal. Fluid flow in the desired direction opens the valve, while backflow forces the valve closed.

. Universal design works with multiple Applications-PVC Fittings, ABS Fittings, Fernco Fittings, Barbed Hose. Package includes one universal check valve and two adaptors, Made from durable ABS plastic. They are classified as one-way directional valves.

More information about Superior Pump 99555


Similar products



Banjo HB100 Polypropylene Hose Fitting, Adapter, 1" NPT Male x 1" Barbed

Banjo Corporation HB100 - The maximum working pressure for this fitting is 150 pounds per square inch psi at 70 degrees F. Hose fittings have various types of connections, dry disconnect, push-to-connect, including threaded, barbed, and others including those based on internationally-accepted specifications. They are made of brass, stainless steel, and other materials that resist corrosion, pressure, galvanized steel, and wear.

Maximum working pressure of 150 psi at 70 degrees F. Glass-reinforced polypropylene for rigidity, lightweight, most chemicals, corrosion, dimensional stability, and resistance to heat, and high impact. Integral hex nut for using a wrench to tighten the fitting. The integral 1-3/8" hex nut provides a gripping surface for a wrench when tightening the fitting.

Banjo HB100 Polypropylene Hose Fitting, Adapter, 1" NPT Male x 1" Barbed - Universal design works with multiple Applications-PVC Fittings, Fernco Fittings, ABS Fittings, Barbed Hose. Package includes one universal check valve and two adaptors, Made from durable ABS plastic. Connects a hose on one end and a female NPT threaded connection on the other. Adapter for connecting pipes or hoses of different types.

This barbed hose adapter is suitable for use in agricultural and industrial systems for liquid flow applications. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems.

More information about Banjo Corporation HB100


Similar products



Flotec FP0012-6U-P2 Universal Discharge Hose Kit, 24-Feet by 1-1/4-Inch or 1-1/2-Inch

Flotec FP0012-6U-P2 - Ideal for pedestal pump discharge. Universal, fits 1-1/4" or 1-1/2". In just minutes yoursquo;ll have the Flotec FP00126U installed and ready to go for either temporary purposes or permanent use. Adapter for connecting pipes or hoses of different types. Glass-reinforced polypropylene for rigidity, most chemicals, and resistance to heat, lightweight, corrosion, dimensional stability, and high impact.

Integral hex nut for using a wrench to tighten the fitting. This universal discharge hose is 24rsquo; long and ready to install for use with any sump pump. Connects a hose on one end and a female NPT threaded connection on the other. About the flotec fp00126u sump pump universal discharge Hose, 24#39; The Flotec FP00126U makes working with your sump pump easy.

Flotec FP0012-6U-P2 Universal Discharge Hose Kit, 24-Feet by 1-1/4-Inch or 1-1/2-Inch - Maximum working pressure of 150 psi at 70 degrees F. Regardless of the project you need it for, this universal discharge hose is sure to deliver excellent performance and make your work as easy as possible. Thread sealant or tape is recommended to be used when installed. Ready to install for emergency or permanent use.

Therersquo;s no need to worry about tricky set up that could lead to disasters. Whether you need to remove a sump pump area or a flooded area, this product will make your work as easy as possible.

More information about Flotec FP0012-6U-P2


Similar products



Water Pump Pressure Controller,110V 50/60HZ Automatic Electric Electronic Switch Control Pump Protection

Estink - Thread sealant or tape is recommended to be used when installed. Working bar pressure: 10 bar inlet&outlet pipe size: 1" max operation temperature: 60℃ Package includes: 1 x Automatic Pump Controller Universal design works with multiple Applications-PVC Fittings, ABS Fittings, Fernco Fittings, Barbed Hose.

Package includes one universal check valve and two adaptors, Made from durable ABS plastic. High quality nitril-bruna N seal. Application: self-priming pump, clarified water pump, Garden Pump, jet pump, centrifugal pump, et. Specification: power supply: 100-120v frequency : 50/60HZ Max Current: 30A Max pump HP: 1.

Water Pump Pressure Controller,110V 50/60HZ Automatic Electric Electronic Switch Control Pump Protection - 1kw max. Connects a hose on one end and a female NPT threaded connection on the other. Hose clamp included, 1-1/4" and 1-1/2" high-impact NPT barbed adapters. Ready to install for emergency or permanent use. Universal, fits 1-1/4" or 1-1/2". Ideal for pedestal pump discharge. Examine the water automatically, pressure tank and check valve etc.

No pressure tank required, Automatically stops if no water is in the pump. Input voltage:110v, maximum power:1.

More information about Estink


Similar products



Koram 100ft 1/4" Blank Distribution Tubing Irrigation Gardener's Greenhouse Plant Cooling Suite Watering Drip Repair and Expansion Kit Accessories include Universal Spigot Connector IR-2F

Koram - Exclusive double-barbed design allows use with higher water pressures up to 50 PSI. Usually takes about 4-7 days. The electric switch is used in water systems, protect the pump from damage caused by dry-running. Universal, fits 1-1/4" or 1-1/2". Ready to install for emergency or permanent use. Expand and customize your drip watering system.

. Maximum working pressure of 150 psi at 70 degrees F. Note: please put the connected part of the hose into the hot water for 10 seconds before assembling Pressure requirements: 25-45PSI If you have any problems during installation, please feel free to contact us. Hose clamp included, 1-1/4" and 1-1/2" high-impact NPT barbed adapters.

Koram 100ft 1/4" Blank Distribution Tubing Irrigation Gardener's Greenhouse Plant Cooling Suite Watering Drip Repair and Expansion Kit Accessories include Universal Spigot Connector IR-2F - Irrigation drippers 40pcs water flow: 0-70l/h 8 holes sprinkler, fernco fittings, ABS Fittings, adjustable and it can be close *3 x Faucet Connect Accessories *1 x Tape Prevent leakage Universal design works with multiple Applications-PVC Fittings, Barbed Hose. Package includes one universal check valve and two adaptors, Made from durable ABS plastic.

1/4"barbed tee 40pcs use to connect 2 sections of 1/4" tubing in order to direct water to another location or connect 1/4" tubing to a supply line. End closure goof plugs 20pcs use as an end closure for 1/4-Inch tubing or as a side plug for 3/8-Inch tubing. 1/4" tubing stakes 40pcs Holds 1/4" drip tubing securely in place.

Application: self-priming pump, centrifugal pump, jet pump, clarified water pump, Garden Pump, et.

More information about Koram


Similar products



Fp13-43 1" Male Npt To Male 3/4" Garden Hose Adapter

Pentair Water FP13-43 - Universal design works with multiple Applications-PVC Fittings, ABS Fittings, Fernco Fittings, Barbed Hose. Package includes one universal check valve and two adaptors, Made from durable ABS plastic. Save up to 70% in water savings which calculates into money in your pocket. Application: self-priming pump, jet pump, Garden Pump, centrifugal pump, clarified water pump, et.

Waters up to 40 plants. This adapter allows you to easily connect your garden hose to your utility pump and therersquo;s no tricky installation here. Adapter for connecting pipes or hoses of different types. Completely replaced traditional pump control system composed of pressure switch, stop the pump in the case of water shortage, start and stop the pump automatically.

Fp13-43 1" Male Npt To Male 3/4" Garden Hose Adapter - Precise drip watering for green, healthy plant growth with low water usage. Bring this product home and in just minutes you can have it set up and ready to use for gardening, yard work, or a little summer fun Regardless of what yoursquo;re using your hose for, the Flotec FP1343 is a simple tool for connecting it securely to your pump and making the most of it.

Glass-reinforced polypropylene for rigidity, dimensional stability, corrosion, lightweight, most chemicals, and resistance to heat, and high impact. Integral hex nut for using a wrench to tighten the fitting. Yoursquo;ll love never needing to buy another garden hose adapter and yoursquo;ll love the great performance that yoursquo;ll experience from this highquality product.

More information about Pentair Water FP13-43


Similar products



Brands2O TC2104-P2 Well Pump Pressure Gauge

Flotec TC2104-P2 - About the flotec tc2104 pressure gauge for jet/submersiblewell and Sprinkler Pumps, 0100 PSI The Flotec TC2104 is a highperformance and highquality tool that allows you to monitor the performance of your jet or submersible well pumps. Shipping: ship within US. Ready to install for emergency or permanent use.

Precise drip watering for green, healthy plant growth with low water usage. Measures from 0 to 100 psi. Save up to 70% in water savings which calculates into money in your pocket. Completely replaced traditional pump control system composed of pressure switch, stop the pump in the case of water shortage, start and stop the pump automatically.

Brands2O TC2104-P2 Well Pump Pressure Gauge - Accessory for utility pumps 1" MNPT Male National Pipe Thread Garden Hose Adapter. Thread sealant or tape is recommended to be used when installed. 1/4-inch nPT connection size. Connects a hose on one end and a female NPT threaded connection on the other. Also monitors water pressure. The product fits easily into frac14;rdquo; female national pipe thread FNPT and can be easily installed for your convenience.

Glass-reinforced polypropylene for rigidity, and resistance to heat, most chemicals, corrosion, lightweight, dimensional stability, and high impact. Integral hex nut for using a wrench to tighten the fitting.

More information about Flotec TC2104-P2


Similar products



110V Automatic Electronic Switch Control Water Pump Pressure Controller 10bar

ECO-WORTHY L07SBYLKG110-1 - Dry running protection to protect motor, extra pump life. Also monitors water pressure. Simple control to maintains constant pressure during operation. Completely replaced traditional pump control system composed of pressure switch, stop the pump in the case of water shortage, start and stop the pump automatically.

Adapter for connecting pipes or hoses of different types. High quality nitril-bruna N seal. Brass fitting, Plastic housing and plastic lens. 1/4-inch nPT connection size. Save up to 70% in water savings which calculates into money in your pocket. Glass-reinforced polypropylene for rigidity, dimensional stability, corrosion, lightweight, and resistance to heat, most chemicals, and high impact.

110V Automatic Electronic Switch Control Water Pump Pressure Controller 10bar - Integral hex nut for using a wrench to tighten the fitting. Expand and customize your drip watering system. Universal, fits 1-1/4" or 1-1/2". Connects a hose on one end and a female NPT threaded connection on the other. Avoid the pump on/off & pressure high/low problems. Used for jet pump - garden Pump - Water Pump - Self - Priming.

Specifications: power supply: 100-120v frequency: 50/60HZ Max Current: 10A Max pump HP: 1HP0

More information about ECO-WORTHY L07SBYLKG110-1


Similar products



ZJchao 110V Automatic Electronic Switch Control Water Pump Pressure Controller

ZJchao CECOMINOD083422 - Universal, fits 1-1/4" or 1-1/2". Monitors the pumps performance. Up to 65 percent water savings compared to manual watering. Ready to install for emergency or permanent use. Input voltage:110v, maximum power:1. 1kw - 1. 5kw, maximum Current :10A. Brass fitting, Plastic housing and plastic lens. Reduce water hammer effects.

Avoid the pump on/off & pressure high/low problems. Application: self-priming pump, centrifugal pump, Garden Pump, clarified water pump, jet pump, et. Waters up to 40 plants. Usually takes about 4-7 days. The electric switch is used in water systems, protect the pump from damage caused by dry-running. Works with submersible sump pumps.

ZJchao 110V Automatic Electronic Switch Control Water Pump Pressure Controller - Hose clamp included, 1-1/4" and 1-1/2" high-impact NPT barbed adapters. 1/4-inch nPT connection size. Ideal for pedestal pump discharge. Maximum working pressure of 150 psi at 70 degrees F. Easy to operate with simple push button controls. Product description: brand new and high quality maintains pressure and flow easy to operate with simple push button controls Led lights indicate the functioning of the pump Automatically stops if no water is in the pump No pressure tank required Automatic control for water pump Input Voltage: 110V Frequency:50-60Hz Maximum Current :10A Maximum Power:1.

More information about ZJchao CECOMINOD083422


Similar products



PHOTNO Fashion Men Boy Summer Slim Fit Short Sleeve Dress Shirt Casual Cotton T Shirt

- Precise drip watering for green, healthy plant growth with low water usage. 1/4-inch nPT connection size. Gender:Men&Boys. Completely replaced traditional pump control system composed of pressure switch, stop the pump in the case of water shortage, start and stop the pump automatically. Brass fitting, Plastic housing and plastic lens.

Style:Fashion&Sport. No pressure tank required, Automatically stops if no water is in the pump. Shipping: ship within US. Measures from 0 to 100 psi. Dry running protection to protect motor, extra pump life. Connects a hose on one end and a female NPT threaded connection on the other. Also monitors water pressure.

PHOTNO Fashion Men Boy Summer Slim Fit Short Sleeve Dress Shirt Casual Cotton T Shirt - Works with submersible sump pumps. And see our " Product Description" size chart. And our product is good with reasonable price and we believe it will be worth having it, so please wait for it patiently!❤But if you want to receive the item after one week, you can choice the DHL Express shipments so the shipping fee is $39.

99 for each product. Thanks for your understanding. Any question please kindly to contact us and we promise to work hard to help you to solve the problem.

More information about


Similar products