#ad
Alfa GPD 15-6SF #ad - A circulation pump can be fitted to a hot water tank, sidearm heat exchanger, manifold, swimming pool heating side, and other parts of the heating system to help circulate the water in the house. Our product comes with three speed options, allowing you to regulate the output to precisely match the requirement of the application.

1" fpt internal threaded flanges are easy for your maintenance and replacement. Multi-applications on residential and commercial hydronic radiant heating and plumbing. Our product, featuring a self-lubricating wet rotor design, operates whisper-quiet and maintenance-free. About the producta heating circulation pump is used to speed up the heating process and circulation of domestic water.

Up to 19.7 Feet Head Range, 3 Speed Switchable for Hydronic Radiant Heating and Plumbing - AB WiseWater Circulation/Circulating Pump with Cast Iron Flange Set/Internal Threaded Flanges #ad - Working condition: rated at 115V 60Hz single phase AC Pressure of system < 1. 0mpa pressure of water inlet > 01 mpa pumped liquid shouldn't include solid impurities exceeding 02mm for indoor use only not for submersible use do not run pump dry use copper conductors only Do not install the motor part above or below the pump body Specifications Model: GPD15-6SF Phase: 1 Capacitance: 10µF Voltage: 115 60Hz Input Power High/Med.

Low; watts: 100 / 70 / 55 rated Current High/Med. Low; Amps. 0

More information about Alfa GPD 15-6SF #ad

Grundfos 519601 3/4-Inch GF 15/26 Cast Iron Flange Set

#ad
Grundfos 519601 #ad - Use with versa Flo UP and UPS pumps. 3/4-inch nPT pipe connection. Includes 2 flanges, 2 gaskets, 2 bolts with nuts. Fitting is threaded for security. Pump connection GF 15/26.

More information about Grundfos 519601 #ad


Similar products



Eastman 60022 Thermal Expansion Tank, 2 Gallon, White

#ad
EZ-FLO International 60022 #ad - Pump connection GF 15/26. Material: it has a high-quality butyl rubber diaphragm and grade 304 stainless steel fittings for long-lasting performance. Options: this thermal water expansion tank is available in varying capacity of 2 gallons and 4. 5 gallons of water; choose as per requirement. The thermal expansion tank has a high-quality butyl rubber diaphragm and 304 stainless steel fittings for long-lasting performance.

Use with versa Flo UP and UPS pumps. The eastman 60022 2-gallon thermal Expansion Tank provides a secure connection to water heaters that prevents dangerous build-ups of pressure. Design: the tank is designed to prevent hot water from back flowing into the cold water line, or escaping through the pressure relief valve.

Eastman 60022 Thermal Expansion Tank, 2 Gallon, White #ad - Includes 2 flanges, 2 gaskets, 2 bolts with nuts. This product comes factory pre-charged at 40 psi. 3/4-inch nPT pipe connection. Dimensions:12. 4-inch x 8. 3-inch X 8. 1-inch with 3/4-inch MIP connection. Fitting is threaded for security.

More information about EZ-FLO International 60022 #ad


Similar products



Flextrol FTH30 Hydronic Expansion Tank 2.1 Gallons for Closed Hot Water Heating Systems, 1/2 Inch MIP Connection, Gray

#ad
Flextrol FTH15 #ad - Without hydronic expansion tanks, the system will quickly over-pressurize resulting in added stress to the various system components. Hydronic non-potable expansion Tank for Closed Hot Water Heating Systems, Boilers. Hydronic expansion tanks absorb the expansion of water in residential or commercial hydronic forced hot water heating and cooling systems.

Pump connection GF 15/26. Material: it has a high-quality butyl rubber diaphragm and grade 304 stainless steel fittings for long-lasting performance. Capacity: 2 gallons of water with a factory pre-charged pressure at 40 PSI. What is hydronic expansion?Hydronic expansion tanks are diaphragm type tanks designed to keep system pressures below relief valve settings.

Flextrol FTH30 Hydronic Expansion Tank 2.1 Gallons for Closed Hot Water Heating Systems, 1/2 Inch MIP Connection, Gray #ad - Dimensions:12. 4-inch x 8. 3-inch X 8. 1-inch with 3/4-inch MIP connection. Includes 2 flanges, 2 gaskets, 2 bolts with nuts. Operating pressure: 75 psi operating temperature: 210 degrees fahrenheit Factory Precharge: 12 PSI Warranty: 1 Year Specifications Model Number: FTH15 Tank Size: 2. 1 gallons Tank Weight: 4.

6 pounds connection size national pipe thread: 1/2" male Iron Pipe MIP Dimensions LxWxH: 9" x 9" x 13" Acceptance Volume: 1.

More information about Flextrol FTH15 #ad


Similar products



Grundfos 519602 1-Inch GF 15/26 Cast Iron Flange Set

#ad
Grundfos 519602 #ad - 3/4-inch nPT pipe connection. 2 bolts with nuts. Design: the tank is designed to prevent hot water from back flowing into the cold water line, or escaping through the pressure relief valve. Dimensions:12. 4-inch x 8. 3-inch X 8. 1-inch with 3/4-inch MIP connection. 1-inch npT pipe connection. Low profile tank design with full Membrane Depth Eliminates Stretching of Diaphragm, Providing Increased Life Cycle.

Mig welding eliminates interior rough spots and Sharp Edges; High Grade Steel Construction; Made In Italy; Certified Synthetic SBR Rubber Diaphragm. Fitting is threaded for security. Pump connection: GF 15/26. Hydronic expansion tanks are diaphragm Type Tanks Designed to Keep System Pressures Below Relief Valve Settings.

Grundfos 519602 1-Inch GF 15/26 Cast Iron Flange Set #ad - Use with versa Flo UP and UPS pumps. 2 gaskets. 2 flanges. Options: this thermal water expansion tank is available in varying capacity of 2 gallons and 4. 5 gallons of water; choose as per requirement. Material: it has a high-quality butyl rubber diaphragm and grade 304 stainless steel fittings for long-lasting performance.

More information about Grundfos 519602 #ad


Similar products



Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support, 100-Pack

#ad
Watts P-960 #ad - Fitting is threaded for security. 2 flanges. For supporting supply and return piping. Comes with 100 J-hooks per bag. Hydronic non-potable expansion Tank for Closed Hot Water Heating Systems, Boilers. Includes 2 flanges, 2 gaskets, 2 bolts with nuts. Use with versa Flo UP and UPS pumps. Options: this thermal water expansion tank is available in varying capacity of 2 gallons and 4.

5 gallons of water; choose as per requirement. 3/4-inch nPT pipe connection. Capacity: 2 gallons of water with a factory pre-charged pressure at 40 PSI. Design: the tank is designed to prevent hot water from back flowing into the cold water line, or escaping through the pressure relief valve. Dimensions:12. 4-inch x 8.

Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support, 100-Pack #ad - 3-inch X 8. 1-inch with 3/4-inch MIP connection. Low profile tank design with full Membrane Depth Eliminates Stretching of Diaphragm, Providing Increased Life Cycle. Material: it has a high-quality butyl rubber diaphragm and grade 304 stainless steel fittings for long-lasting performance. Pump connection GF 15/26.

More information about Watts P-960 #ad


Similar products



3/4" Brass Electric Solenoid Valve 110V AC Normally Closed Water, air, Diesel.

#ad
U.S. SOLID USS2-00007 #ad - Hydronic expansion tanks are diaphragm Type Tanks Designed to Keep System Pressures Below Relief Valve Settings. This can lead to burnout of the coil, and malfunctioning of the valve. 2 bolts with nuts. Valve is not intended to be energized continuously for more than 8 hours. Customers chose this general purpose valve for: do-it-yourself projects, harsh chemicals, flow control for irrigation systems, moderate temperature applications, reverse osmosis systems, or home brewing.

Manufactured in China. Contact [email protected] Com. Fitting is threaded for security. 1 year warranty. U. S. 1/2-inch j-hook pipe hanger for PEX tubing. Material: it has a high-quality butyl rubber diaphragm and grade 304 stainless steel fittings for long-lasting performance. Capacity: 2 gallons of water with a factory pre-charged pressure at 40 PSI.

3/4" Brass Electric Solenoid Valve 110V AC Normally Closed Water, air, Diesel. #ad - Low profile tank design with full Membrane Depth Eliminates Stretching of Diaphragm, Providing Increased Life Cycle. Brand: U. S.

More information about U.S. SOLID USS2-00007 #ad


Similar products



10 PIECES 1/2" PEX BRASS FULL PORT SHUT OFF BALL VALVE LEAD-FREE

#ad
XFITTING #ad - Low profile tank design with full Membrane Depth Eliminates Stretching of Diaphragm, Providing Increased Life Cycle. Use with versa Flo UP and UPS pumps. Contact [email protected] Com. Easy to use for contractors and homeowners. 2 bolts with nuts. Dimensions:12. 4-inch x 8. 3-inch X 8. 1-inch with 3/4-inch MIP connection.

Hydronic forced hot water expansion Tanks Absorb the Expansion of Water in Residential or Commercial Hydronic Heating and Cooling Systems. Fitting is threaded for security. 3/4-inch nPT pipe connection. Pump connection GF 15/26. Options: this thermal water expansion tank is available in varying capacity of 2 gallons and 4.

10 PIECES 1/2" PEX BRASS FULL PORT SHUT OFF BALL VALVE LEAD-FREE #ad - 5 gallons of water; choose as per requirement. Includes 2 flanges, 2 gaskets, 2 bolts with nuts. Pump connection: GF 15/26. Capacity: 2 gallons of water with a factory pre-charged pressure at 40 PSI. Same/1 day handling time, using 1-3 days priority mail w.

More information about XFITTING #ad


Similar products



2 Ft - 1/2" PEX Aluminum Heat Transfer Plates, 100/box for Radiant Heating HP-2 by PEX GUY

#ad
PEX GUY FBA HP-2 #ad - Can be used for subfloor or sandwich type radiant heating installations to improve heat transfer properties of the system and lower the water supply temperature, thus reducing the heating bills. Mig welding eliminates interior rough spots and Sharp Edges; High Grade Steel Construction; Made In Italy; Certified Synthetic SBR Rubber Diaphragm.

This is a box of genuine pex guy 2ft long Aluminum Heat Transfer Plates for 1/2" PEX tubing. Recommended spacing for parallel tubing runs is 8" OC. 1-inch npT pipe connection. Same/1 day handling time, using 1-3 days priority mail w. Tracking # and insured. Dimensions: 24" long x 4. 31" wide x. 016" thick. 3/4" brass direct acting with VITON gasket.

2 Ft - 1/2" PEX Aluminum Heat Transfer Plates, 100/box for Radiant Heating HP-2 by PEX GUY #ad - Iso/oem/odm/ce. Fitting is threaded for security. For supporting supply and return piping. Use with versa Flo UP and UPS pumps. Calculations assuming 8 inch spacing: Number of plates = sq area x 1.

More information about PEX GUY FBA HP-2 #ad


Similar products



Watts 0590715 1/8" FV-4M1 Automatic Float Vent

#ad
Watts Brass & Tubular 0590715 #ad - Includes 2 flanges, 2 gaskets, 2 bolts with nuts. 1 year warranty. Capacity: 2 gallons of water with a factory pre-charged pressure at 40 PSI. Impurities do not usually affect function as maximum float line of water is always lower than the valve seal. Design: the tank is designed to prevent hot water from back flowing into the cold water line, or escaping through the pressure relief valve.

It consists of a brass body construction with female NPT connection, air vent with silicone rubber seal, polyethylene float with valve plug, brass cover, and automatic vent. Same/1 day handling time, using 1-3 days priority mail w. Tracking # and insured. Fitting is threaded for security. Mig welding eliminates interior rough spots and Sharp Edges; High Grade Steel Construction; Made In Italy; Certified Synthetic SBR Rubber Diaphragm.

Watts 0590715 1/8" FV-4M1 Automatic Float Vent #ad - 1/2-inch j-hook pipe hanger for PEX tubing. Genuine pex GUY Brand plates. Proudly Made in USA. 3/4" brass direct acting with VITON gasket. Iso/oem/odm/ce. High Quality.

More information about Watts Brass & Tubular 0590715 #ad


Similar products



Motorized Ball Valve- 3/4" Brass Ball Valve with Standard Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid

#ad
U.S. Solid #ad - Options: this thermal water expansion tank is available in varying capacity of 2 gallons and 4. 5 gallons of water; choose as per requirement. Comes with 100 J-hooks per bag. Since this valve is a normally closed N/C ball valve, it will automatically return to a closed position when the power source is eliminated.

The stem and body of the valve are comprised of hefty brass. Suitable for use with glycol systems. This is key, since many people use these valves in their home water systems. The valve actuates with 9-24V of AC or DC power. 3/4" brass direct acting with VITON gasket. Iso/oem/odm/ce. Mig welding eliminates interior rough spots and Sharp Edges; High Grade Steel Construction; Made In Italy; Certified Synthetic SBR Rubber Diaphragm.

Motorized Ball Valve- 3/4" Brass Ball Valve with Standard Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid #ad - Contact [email protected] Com. Maximum pressure: 150 psi 10 bar. Proudly Made in USA. Dimensions: 24" long x 4. 31" wide x.

More information about U.S. Solid #ad


Similar products