Zoeller M63 PREMIUM SERIES 5 Year Warranty Mighty-mate Submersible Sump Pump, 1/3 Hp by Zoeller

#ad
Zoeller M63 #ad - Provides increased durability & less heat for extended protection 1-½" npt Discharge •Compatible with most residential & light commercial applications 10-Foot Power Cord UL Listed w/ LED Lighted Plug End •Easily see when there is power available to the the pump. For residential / light commercial dewatering, groundwater transfer & effluent.

New for 2016 *5-year limited warranty* •Attention to detail in this series for total reliability & trouble free performance. 5-year warranty float-operated, buoyant, neoprene square ring between motor and pump housing solid, hermetically-sealed, guard and handle no screens to clog watertight, powder-coated epoxy finish all cast iron construction Viton outer switch boot No sheet metal parts to rust or corrode Stainless steel screws, switch arm, submersible, 2-pole mechanical switch integrating advanced switch technology Corrosion-resistant, polypropylene float Oil-filled, automatic reset thermal overload protected motor Upper and lower sleeve bearings running in bath of oil Entire unit pressure-tested after assembly Carbon and ceramic shaft seal Maximum temperature for effluent or dewatering: 130° F 54° C Passes ½" 13 mm spherical solids 1½" NPT discharge On point: 7¼" 18 cm Off point: 3" 8 cm Major width: 10-3/32" 26.

Zoeller M63 PREMIUM SERIES 5 Year Warranty Mighty-mate Submersible Sump Pump, 1/3 Hp by Zoeller #ad - 2 cm major height: 10-1/16" 25. 6 cm watertight and dust-tight permanently oiled bearings Cast iron impeller Zoeller m63 '"premium Series" Automatic Submersible Sump Pump.

More information about Zoeller M63 #ad

Zoeller 30-0181 PVC Plastic Check Valve, 1-1/2 Inch

#ad
Zoeller 30-0181 #ad - 1-1/2 slip x slip unions. When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability. Capable of vertical or horizontal installation. Flapper bends over a radius to eliminate sharp 90-degree edges.

Slip x slip for 4. 3 psi 10 feet of head at 130°F. Designed to reduce water hammer.

More information about Zoeller 30-0181 #ad


Similar products



CHECK VALVE QUIET CLR1.5 by BRADY MfrPartNo 0823-15C

#ad
Campbell #ad - Check valve quiet clr1. 5 1-1/2 slip x slip unions. Slip x slip for 4. 3 psi 10 feet of head at 130°F. Flapper bends over a radius to eliminate sharp 90-degree edges. Designed to reduce water hammer. Brady. Capable of vertical or horizontal installation.

More information about Campbell #ad


Similar products



Pump Stand

#ad
Zoeller 190567 #ad - Flapper bends over a radius to eliminate sharp 90-degree edges. Designed to reduce water hammer. Height: 2". Slip x slip for 4. 3 psi 10 feet of head at 130°F. Mounts directly to pump for easy removal of pump and stand out of pit. 10-2421 features: -Pump stand. 1-1/2 slip x slip unions. Price for: each manufacturers Warranty Length: 1 Year Country of Origin subject to change: United States.

Brady. Raises pump above silt and solids found in the bottom of a sump pit. Pvc pipe can be used as legs to adjust height. Extends life of the pump to help alleviate pump blockages. Capable of vertical or horizontal installation.

More information about Zoeller 190567 #ad


Similar products



WAYNE 66000-WYN1 1-1/2 in. by 24 ft. Sump Discharge Hose Kit With Clamps

#ad
Wayne Pumps 66000-WYN1 #ad - Sump discharge hose kit. It's sectioned at every eight feet for easy cutting to the desired length, with a threaded male adapter and hose clamp for mounting to the pump. Price for: each manufacturers Warranty Length: 1 Year Country of Origin subject to change: United States. Brady. Compatible with all sump pumps with 1-1/2-inch discharge tapping.

Capable of vertical or horizontal installation. Flapper bends over a radius to eliminate sharp 90-degree edges. The wayne 1-1/2-inch-by-24-foot sump discharge hose kit with clamps can be used with all sump pumps that have a 1-1/2-inch discharge tapping. Designed to reduce water hammer. Sectioned every 8 feet for fast cutting.

WAYNE 66000-WYN1 1-1/2 in. by 24 ft. Sump Discharge Hose Kit With Clamps #ad - 1-1/2 slip x slip unions. Slip x slip for 4. 3 psi 10 feet of head at 130°F. Includes threaded male adapter and hose clamp.

More information about Wayne Pumps 66000-WYN1 #ad


Similar products



Zoeller 30-0151 2-Inch Cast Iron Slip x Slip Check Valve Union

#ad
Zoeller 30-0151 #ad - Slip x slip for 4. 3 psi 10 feet of head at 130°F. Extra wide hinge to reduce hinge stress. Price for: each manufacturers Warranty Length: 1 Year Country of Origin subject to change: United States. Sectioned every 8 feet for fast cutting. Sump discharge hose kit. Designed to reduce water hammer. F max. Full 2-inch flow design - meets BOCA P.

604. 2. Zoeller check valve union *prevents back flow of water and sewer gas *full flow *extra wide flapper hinge prevents hinge stress *Vertical or horizontal line *Slips over ABS, steel or copper pipe *Flexible neoprene unions *Includes clamps, PVC, unicheck *Rated at 25 PSI pressure 57 ft. Compatible with all sump pumps with 1-1/2-inch discharge tapping.

Zoeller 30-0151 2-Inch Cast Iron Slip x Slip Check Valve Union #ad - Bulk *2" x 2" cast iron slip x Slip 1-1/2 slip x slip unions. 2 inch full flow pump code. Corrosion resistant powder coated epoxy finish. Stainless steel screws. Brady. Includes threaded male adapter and hose clamp. Capable of vertical or horizontal installation.

More information about Zoeller 30-0151 #ad


Similar products



Fernco P1056-150 1-1/2-Inch Stock Coupling

#ad
Fernco Inc. P1056-150 #ad - Capable of vertical or horizontal installation. Price for: each manufacturers Warranty Length: 1 Year Country of Origin subject to change: United States. Highly durable. Their products are top quality and have been highly rated by many homeowners and plumbers alike. Fernco is a global leader in Flexible Coupling, Drainage and Plumbing Systems.

Flapper bends over a radius to eliminate sharp 90-degree edges. Stainless steel screws. Brady. Manufactured in china. 2 inch full flow pump code. Includes threaded male adapter and hose clamp. Full 2-inch flow design - meets BOCA P. 604. 2. Extra wide hinge to reduce hinge stress. 1. 94 inch x 1. 94 inch x 3. 43 inch. Corrosion resistant powder coated epoxy finish.

Fernco P1056-150 1-1/2-Inch Stock Coupling #ad - Sectioned every 8 feet for fast cutting.

More information about Fernco Inc. P1056-150 #ad


Similar products



WAYNE 1-1/2 in. Check Valve With PVC Clamps

#ad
Wayne 66005-WYN #ad - Check valve kit. For use with all types of sump pumps. Highly durable. Wayne 66005-wyN1 1. 5 in. Corrosion resistant powder coated epoxy finish. Reduces noise. Includes 1-1/4" reducer boot. Manufactured in china. Color = black. Capable of vertical or horizontal installation. For use with 1-1/4" or 1-1/2" od pipe. Full 2-inch flow design - meets BOCA P.

604. 2. Price for: each manufacturers Warranty Length: 1 Year Country of Origin subject to change: United States. Extra wide hinge to reduce hinge stress. Brady. Stock coupling. 1-1/2 slip x slip unions. Includes threaded male adapter and hose clamp. Use to connect any two pipes. Sump discharge hose kit. Designed to reduce water hammer.

WAYNE 1-1/2 in. Check Valve With PVC Clamps #ad - Item has threaded male end 1 1/2" and outflow shoulder end 1 1/4", and includes 1 1/2" shoulder end adapter. Made of PVC.

More information about Wayne 66005-WYN #ad


Similar products



Zoeller 004892 Replacement Switch for 50 and 90 Series Pumps

#ad
Moen 004892 #ad - Use to connect any two pipes. Zoeller company #004892 repl switch/50/90 Pump. 2 inch full flow pump code. Includes 1-1/4" reducer boot. Sectioned every 8 feet for fast cutting. 1-1/2 slip x slip unions. Manufactured in china. Reduces noise. For use with all types of sump pumps. Highly durable. Compatible with all sump pumps with 1-1/2-inch discharge tapping.

1. 94 inch x 1. 94 inch x 3. 43 inch. For use with 1-1/4" or 1-1/2" od pipe. Stainless steel screws. Price for: each manufacturers Warranty Length: 1 Year Country of Origin subject to change: United States. Corrosion resistant powder coated epoxy finish. Flapper bends over a radius to eliminate sharp 90-degree edges.

Zoeller 004892 Replacement Switch for 50 and 90 Series Pumps #ad - Extra wide hinge to reduce hinge stress. Capable of vertical or horizontal installation. Easy to use. For submersible pump models 53, 55, 57, 59, 97 and 98.

More information about Moen 004892 #ad


Similar products

Float #ad


Zoeller 30-0041 50 psi PVC 2-Port Check Valve, 1-1/2"

#ad
Zoeller Company 30-0041 #ad - Includes 1-1/4" reducer boot. Made in USA. Use to connect any two pipes. Price for: each manufacturers Warranty Length: 1 Year Country of Origin subject to change: United States. Reduces noise. Includes threaded male adapter and hose clamp. Stainless steel screws. For use with all types of sump pumps. Corrosion resistant powder coated epoxy finish.

Compatible with all sump pumps with 1-1/2-inch discharge tapping. Manufactured in china. Extra wide hinge to reduce hinge stress. Full 2-inch flow design - meets BOCA P. 604. 2. Zoeller 30-0041 50 psi pvc 2-port check valve, 1-1/2" 1-1/2 slip x slip unions. 2 inch full flow pump code. Sump discharge hose kit. Zoeller company #004892 repl switch/50/90 Pump.

Zoeller 30-0041 50 psi PVC 2-Port Check Valve, 1-1/2" #ad - Highly durable. Easy to use. Stock coupling.

More information about Zoeller Company 30-0041 #ad


Similar products



Wayne WSB1275 75Ah AGM Sealed Lead Acid Battery

#ad
Standard Plumbing Supply WSB1275 #ad - Compatible with all sump pumps with 1-1/2-inch discharge tapping. For submersible pump models 53, 59, 55, 57, 97 and 98.12 volt, 75 amp hour. Item has threaded male end 1 1/2" and outflow shoulder end 1 1/4", and includes 1 1/2" shoulder end adapter. Made of PVC. Carry handles for convenience. Keeps water from returning to sump basin.

Pre-charged and ready to use. Pre-charged and ready to use. Includes 1-1/4" reducer boot. Corrosion resistant powder coated epoxy finish. Manufactured in china. Includes threaded male adapter and hose clamp. Reduces noise. 1. 94 inch x 1. 94 inch x 3. 43 inch. Sectioned every 8 feet for fast cutting. Stainless steel screws. For use with 1-1/4" or 1-1/2" od pipe.

More information about Standard Plumbing Supply WSB1275 #ad


Similar products