Basepump RB 750 Water Powered Backup Sump Pump

Connects directly to your home water supply and discharges to exterior or into existing discharge from main pump. Reliable back Up Sump Pump for most homes. No battery to wear out or maintain. No charger to plug in or monitor. Automatic, independent system from the primary sump pump. High quality, durable materials.

Uses water to pump water! This design means greater efficiency and high pumping rates. Suitable for use with Radon covers. Uniquely designed backup sump pump that is mounted on the ceiling above the sump, not in the sump itself; keeping it clean and dry until needed. Extremely reliable, very powerful, water powered backup sump pump system.

Uses completely hydraulic float and valve system for reliable operation. Mounted on the ceiling, high above the sump, clean and dry. Fact is: a back-up sump pump is needed in every home.

---

Zoeller 30-0181 PVC Plastic Check Valve, 1-1/2 Inch

1-1/2 slip x slip unions. Capable of vertical or horizontal installation. When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability. Designed to reduce water hammer. Slip x slip for 4.

3 psi 10 feet of head at 130°F. Flapper bends over a radius to eliminate sharp 90-degree edges.


Similar products

---

SharkBite U370LFA 3/4-Inch Tee, Plumbing Fittings for Residential and Commercial Water Applications, Lead-Free

Sharkbite push-to-connect fittings require no glue, solder or unions. Connects to copper tubing, pex tubing, CPVC pipe, HDPE pipe and PE-RT. Lead free dezincification Resistant Brass for durability and reliability. Slip x slip for 4. 3 psi 10 feet of head at 130°F. Capable of vertical or horizontal installation.

. 1-1/2 slip x slip unions. Rated to 200°f and 200 PSI. The 3/4-inch sharkbite push-to-connect tee is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Designed to reduce water hammer. Sharkbite fittings are certified for potable water supply, hydronic heating, underground and behind-the-wall applications.

Flapper bends over a radius to eliminate sharp 90-degree edges. Certified for underground and behind-the-wall applications without access panels.


Similar products

---

SharkBite U2016-0000LFA Check Valves, 3/4-Inch

Rated to 200°f and 200 PSI. No soldering, unions, clamps, or glue required. Connects copper, peX, and CPVC pipe in any combination. Designed for vertical and horizontal installation. Made in Australia. Flapper bends over a radius to eliminate sharp 90-degree edges. Capable of vertical or horizontal installation.

Easily fits and this is easy to install. For use with od controlled copper, CPVC or PEX pipe. Designed to reduce water hammer. Connects to copper tubing, pex tubing, CPVC pipe, HDPE pipe and PE-RT. Lead free dezincification Resistant Brass for durability and reliability. Sharkbite push-to-connect fittings require no glue, solder or unions.

Lead Free Compliant. Slip x slip for 4. 3 psi 10 feet of head at 130°F. Certified for underground and behind-the-wall applications without access panels. For use with od controlled copper, cpvc or pex pipe | rated to 200° f and 200 psi | Corrosion resistant, DZR brass body | Designed for hydronic heating as well as potable water | Approved for underground installations 1-1/2 slip x slip unions.

.


Similar products

---

Dual Check Valve 3/4" US Pipe Size

Protects potable water pipes from contamination. No soldering, clamps, unions, or glue required. Connects copper, peX, and CPVC pipe in any combination. Designed for vertical and horizontal installation. Made in Australia. This is a simple device to prevent back-Flow, which is a rare condition that can occur when positive water pressure suddenly becomes negative and can actually pull sump water back into the potable drinkable water supply.

Capable of vertical or horizontal installation. Solid Brass Construction. Flapper bends over a radius to eliminate sharp 90-degree edges. This device closes immediately to stop any contamination. 1-1/2 slip x slip unions. Designed to reduce water hammer. Sharkbite push-to-connect fittings require no glue, solder or unions.

Certified for underground and behind-the-wall applications without access panels. Slip x slip for 4. 3 psi 10 feet of head at 130°F. Operates like a union fitting so you don't need another one.


Similar products

---

CHECK VALVE QUIET CLR1.5 by BRADY MfrPartNo 0823-15C

Capable of vertical or horizontal installation. Lead Free Compliant. Certified for underground and behind-the-wall applications without access panels. Made in Australia. Female threaded on both ends. Slip x slip for 4. 3 psi 10 feet of head at 130°F. Easily fits and this is easy to install. Sharkbite push-to-connect fittings require no glue, solder or unions.

1. 5", quiet sump check valve, no slamming when flapper closes, true union design allows for Easy Repair Or Pump Replacement, Clear Heavy Duty PVC For Monitoring Check Valve Operation, 1/2 LB Stainless Steel Spring, Solvent Weld Connection To Piping.1-1/2 slip x slip unions. Operates like a union fitting so you don't need another one.

Connects to copper tubing, pex tubing, CPVC pipe, HDPE pipe and PE-RT. Lead free dezincification Resistant Brass for durability and reliability. Rated to 200°f and 200 PSI. Protects potable water pipes from contamination. For use with od controlled copper, CPVC or PEX pipe. Solid Brass Construction. Brady.


Similar products

---

WAYNE CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump With Integrated Vertical Float Switch

For use with od controlled copper, CPVC or PEX pipe. No soldering, clamps, unions, or glue required. Connects copper, peX, and CPVC pipe in any combination. Designed for vertical and horizontal installation. Made in Australia. Connects to copper tubing, cpVC pipe, pex tubing, HDPE pipe and PE-RT. Lead free dezincification Resistant Brass for durability and reliability.

Slip x slip for 4. 3 psi 10 feet of head at 130°F. Operates like a union fitting so you don't need another one. Capable of vertical or horizontal installation. Certified for underground and behind-the-wall applications without access panels. Rated to 200°f and 200 PSI. Of discharge lift. Assembled in the US with foreign and domestic parts.

Top suction pump design minimizes air locks and clogging from debris in bottom of sump pit. Solid Brass Construction. 3/4 hp; max. Flow rate is 4600 gallons per hour; 3500 gph at 10 ft. Brady.


Similar products

---

SharkBite 22185-0000LF Ball Valve SB 3/4"LL

Quick connection. Designed to reduce water hammer. Assembled in us, with foreign and domestic components. No soldering, unions, clamps, or glue required. Connects copper, peX, and CPVC pipe in any combination. Designed for vertical and horizontal installation. Solid Brass Construction. Capable of vertical or horizontal installation.

Operates like a union fitting so you don't need another one. Ball valve. For use with od controlled copper, CPVC or PEX pipe. Get sharkbite, and get a grip on your next Plumbing project. Vertical float switch, tested to 1 million cycles! Connects to copper tubing, cpVC pipe, pex tubing, HDPE pipe and PE-RT. Lead free dezincification Resistant Brass for durability and reliability.

Female threaded on both ends. It's the easiest way to join copper, clamps, cpvc or pex pipe in any combination - with no soldering, unions or glue. Flapper bends over a radius to eliminate sharp 90-degree edges. Easy disconnect. Sharkbite is the push-fit connection system that's really taking hold.


Similar products

---

Zoeller 98-0001 115-Volt 1/2 Horse Power Model M98 Flow-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump

Protects potable water pipes from contamination. Flapper bends over a radius to eliminate sharp 90-degree edges. Connects to copper tubing, pex tubing, CPVC pipe, HDPE pipe and PE-RT. Lead free dezincification Resistant Brass for durability and reliability. Made in Australia. Sharkbite push-to-connect fittings require no glue, solder or unions.

Highly forged brass. Solid Brass Construction. Quick connection. Easily fits and this is easy to install. Of discharge lift. Stainless steel motor housing and rugged, cast iron pump base. Single lever control. Capable of vertical or horizontal installation. Easy disconnect. Shut-off head: 23-Feet. Slip x slip for 4. 3 psi 10 feet of head at 130°F.

Assembled in the US with foreign and domestic parts. Top suction pump design minimizes air locks and clogging from debris in bottom of sump pit. Flow-mate" submersible pump 1/2 hp for sump/dewatering septic tank effluent thermal overload protected cast iron stainless steel screws 2-pole float operated mechanical switch 1-1/2" NPT discharge Passes 1/2" solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton 1-1/2 slip x slip unions.




Similar products

---

Fernco P1056-150 1-1/2-Inch Stock Coupling

Solid Brass Construction. Flapper bends over a radius to eliminate sharp 90-degree edges. Flow rate is 4600 gallons per hour; 3500 gph at 10 ft. Highly durable. Highly forged brass. Manufactured in china. No soldering, unions, clamps, or glue required. Connects copper, peX, and CPVC pipe in any combination. Designed for vertical and horizontal installation.

Includes a 15-Foot 3-wire neoprene cord. Slip x slip for 4. 3 psi 10 feet of head at 130°F. 1. 94 inch x 1. 94 inch x 3. 43 inch. Push fitting. For use with od controlled copper, CPVC or PEX pipe. Connects to copper tubing, cpVC pipe, pex tubing, HDPE pipe and PE-RT. Lead free dezincification Resistant Brass for durability and reliability.

Quick connection. Female threaded on both ends. Made in Australia. Sharkbite push-to-connect fittings require no glue, solder or unions.


Similar products

---

Zoeller 57-0001 M57 Basement High Capacity Sump Pump

Us made by quality craftsman. Highly durable. Shut-off head: 23-Feet. Use to connect any two pipes. Made in USA. Lead free. Dimensions: 1006" h x 1009" w. Assembled in us, with foreign and domestic components. Horse power: 1/3HP. Made in Australia. Designed to reduce water hammer. Flapper bends over a radius to eliminate sharp 90-degree edges.

Certified for underground and behind-the-wall applications without access panels. Easy disconnect. Of discharge lift. Pumps 72-gallons per minute with 5-Foot head. Stock coupling. Vertical float switch, tested to 1 million cycles! Operates like a union fitting so you don't need another one. 57-0001 features: -Automatic sump pump.

3/4 hp; max. On point: 9-1/2-inch, off point: 3-Inch. Single lever control. Ball valve.


Similar products