CHUGGER PUMP XCPSS-IN-1 X-DRY with Run Dry Protection, SS 115 Volt Inline Home Brewing System Beer Pump, 55″ Cord w/Plug, 1/2″ MPT Connections, ETL-Certified, US FDA Food Compliant Materials

This pump is not a self-priming pump - the CHUGGER PUMP head must be flooded with liquid prior to turning on the pump. New chugger pump xcpss-in-1 x-dry with run dry protection is the first pump made by brewers for home brewers like you. Inlet 1/2" mpt and outlet 1/2" mpt allows configuration for any application; 1/20 hp.

04 hp. 029 kw; motor Only: 1. 7 amps; motor and Pump: 1. 9 amps; motor amp rating: full-load Amps FLA; This is NOT a Self-Priming Pump. Transfers flow of hot and cold liquids between brewing vessels or kettles; cools Wort Via a Counter-Flow Chiller; Recirculates Ice Water for Quicker Chilling; Circulator Pump with 316 Stainless Steel Front and Rear Housing; Made by Brewers for Brewers.

Please check your electrical requirements before placing order. Etl-certified and made with usfda food compliant materials, it's a premium, sensible, and affordable alternative to expensive March pumps and has 25 percent more power with its 1/20 HP motor. New fda approved run dry carbon bearing material x-dry run dry protection.

Must be wired by an electrician. Light enough to be portable; high-quality stainless steel pump head eliminates Stripped Threads; Head is Interchangeable with Existing March Pump Motors; Magnetic Drive with Base, Clear Silicone O-Ring, Teflon Thrust Washer, and Ryton/Teflon Impeller. Max flow rate of 7 gpm 26.

---

Stainless Steel Male Quick Disconnect FPT 1/2"

We are manufacturer so discount can be offered for bigger order. 1/2" stainless steel Quick Disconnect Fitting NPT. Mpt disconnect screws into your ball valve and the barb side connects to 1/2"ID tubing. Origin: China. Made from Stainless Steel 304. Quick disconnects make the mashing and boiling process much easier and much cleaner.

With traditional barb fittings, it is very difficult to clean the tubing and pipe fitting during the process. Perfect for Brewing Applications. With these quick disconnects, you can quickly remove the tubing and submerge in sanitizer when not in use.


Similar products

---

Cowin brewing Stainless Steel Female Quick Disconnect FPT 1/2"

Perfect for Brewing Applications. Holds pressure for brewing applications. 1/2" female quick disconnect made from Stainless Steel 304 And Comes With Food-Grade O-Ring. 1/2 inch quick disconnect Female Threaded NPT. 1/2" stainless steel Quick Disconnect Fitting NPT. Origin: China. Origin: China. Stainless Steel 304.

Holds pressure for brewing Applications When Moving Liquids At 60Psi Or Less. We are manufacturer so discount can be offered for bigger order. Perfect for home brewing. Made from Stainless Steel 304.


Similar products

---

Inkbird Itc-308 Digital Temperature Controller Outlet Thermostat, 2-stage, 1100w, w/Sensor

10a, 100v ~265v ac buzzer alarm: high and low temperature Alarm Sensor Type: NTC sensor Including Sensor Length: 2m / 6. 56ft input power Cable Length: 1. 5m 5ft output power cable length: 30cm 1ft Dimension Body: 140x68x33mm 5. 5x2. 7x1. 3inch socket: 85x42x24mm3. 3x1. 7x1inch ambient temperature: -30~ 75 ° c / -22~ 167 ° f storage temperature: -20~ 60 ° c / -4~ 140 ° f humidity 20~85% no condensate Warranty: 1 Year Package Content: 1x ITC-308 temperature controller; 1x Manual Note: This listing sensor's probe dimension is 50mm x 6mm.

Stainless Steel 304. 1/2 inch quick disconnect Female Threaded NPT. We are manufacturer so discount can be offered for bigger order. Maximum output load: 1100W110V. Made from Stainless Steel 304. Plug and play design, easy to use;. Holds pressure for brewing applications. Dual display window, be able to display measured temperature and set temperature at the same time.

Dual relay output, be able to connect with refrigeration and heating equipment at the same time. Perfect for Brewing Applications.


Similar products

---

NY Brew Supply W3850-CV Super Efficient 3/8 x 50' Copper Wort Chiller

This product is proudly made in the USA. Made from Stainless Steel 304. Stainless Steel 304. 1/2 inch quick disconnect Female Threaded NPT. High quality brass hose adapter. Support reading with Centigrade or Fahrenheit unit. Perfect for home brewing. 12' of vinyl tubing is shipped in 1 continuous piece, allowing you to simply cut to the desired length of your input & output hoses.

This super efficient immersion chiller is recommended for 5 to 15 gallon batches, and is made from 50 feet of 3/8 inch copper tubing that will easily cool your wort in minutes! plenty of vinyl tubing is included along with a garden hose adapter, stainless steel clamps and instruction sheet. With twice the copper of our standard 3/8 inch.

Plug and play design, easy to use;. Holds pressure for brewing applications. Origin: China. Origin: China. Dual relay output, be able to connect with refrigeration and heating equipment at the same time. Perfect for Brewing Applications. 1/2" stainless steel Quick Disconnect Fitting NPT.


Similar products

---

25 Feet - Silicone Tubing, 1/2"ID, 3/4"OD, 1/8"Wall

Holds pressure for brewing applications. With twice the copper of our standard 3/8 inch. High quality brass hose adapter. Plug and play design, easy to use;. 12' of vinyl tubing is shipped in 1 continuous piece, allowing you to simply cut to the desired length of your input & output hoses. We are manufacturer so discount can be offered for bigger order.

Origin: China. Stainless Steel 304. Dual display window, be able to display measured temperature and set temperature at the same time. Standard barbed fittings and lined hose clamps are recommended for most applications. 1/2 inch quick disconnect Female Threaded NPT. Meets fda requirements for use with food contact surfaces.

It is serializable with steam or gas for repeated use. Silicone is resistant to ozone, engine and transmission oil, detergent, salt water, vegetable and animal oils, hydraulic fluids that resist fire, non-petroleum brake fluid, weather, and high molecular weight chlorinated aromatic hydrocarbons. Support reading with Centigrade or Fahrenheit unit.

Applications for tubing include blood and fluid handling, peristaltic pumps, analytical systems, electrical and thermal insulation, and food and beverage handling, among others. Good electrical and weather ability properties - resists u. V.


Similar products

---

CONCORD 304 Stainless Steel Quick Disconnect Barb Hose with MPT Set. Home Brewing Mash Tun. Barb Female/MPT Male

We are manufacturer so discount can be offered for bigger order. Origin: China. Good electrical and weather ability properties - resists u. V. Gases, ozone, and moisture. Silicone tubing, 1/2"id, 3/4"od, 1/8"wall - 25 feet. All parts made with solid 304 Stainless Steel. Support reading with Centigrade or Fahrenheit unit.

Plug and play design, easy to use;. Makes sanitation a breeze. Meets fda requirements for use with food contact surfaces. Maximum output load: 1100W110V. Built to last a lifetime. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal.

Stainless Steel 304. Parts disconnect in literally one second. Includes: 1/2" barb female fitting, 1/2" MPT Male fitting. 1/2" stainless steel Quick Disconnect Fitting NPT. Quick disconnect fitting set allows for fast removal of tubing. Holds pressure for brewing applications.


Similar products

---

1/2" FPT TO 1/2" BARB - Stainless Steel

Flexible tubing for air, food, water, and beverage - durometer: 50A. Semi-transparent silicone rubber - will withstand repeated use and sterilization. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal. Origin: China.

Parts disconnect in literally one second. Includes: 1/2" barb female fitting, 1/2" MPT Male fitting. With twice the copper of our standard 3/8 inch. 1/2" fpt on one side, with a 1/2" barb on the other. 1/2 inch quick disconnect Female Threaded NPT. Perfect for home brewing. 1/2fpt on one side, with a 1/2Barb on the other.

Plug and play design, easy to use;. Built to last a lifetime. Meets fda requirements for use with food contact surfaces. Stainless Steel 304. Odorless, tasteless, and inert. Origin: China.


Similar products

---

Five Star PBW, 4 lbs

And C. O. D. Origin: China. Effective substitute for caustic soda cleaners. 1/2 inch quick disconnect Female Threaded NPT. Quick disconnect allows easy disconnecting and sanitizing with just a push of a lever. High temp silicon gasket in each QD fitting for a water tight seal. Meets fda requirements for use with food contact surfaces.

Cleaner is very effective in removing protein soils. P. B. W. With twice the copper of our standard 3/8 inch. The oxygen also helps in reducing b. O. D. Made from Stainless Steel 304. Because of its unique formulation of buffers and mild alkalis, it is safe on skin as well as soft metals such as stainless steel, aluminum, and on plastics.

Support reading with Centigrade or Fahrenheit unit. High quality brass hose adapter. Odorless, tasteless, and inert. In wastewater, which is an added environmental benefit. Built to last a lifetime.


Similar products

---

Brewing 1/2" Female Quick Disconnect 304 Stainless Steel 1/2" Barb

1/2fpt on one side, with a 1/2Barb on the other. Made from Stainless Steel 304. Meets fda requirements for use with food contact surfaces. We are manufacturer so discount can be offered for bigger order. Quick disconnects make the mashing and boiling process much easier and much cleaner. Perfect for Brewing Applications.

Plastic construction. Cleaner is very effective in removing protein soils. Mpt disconnect screws into your ball valve and the barb side connects to 1/2"ID tubing. Origin: China. Perfect for home brewing. With traditional barb fittings, it is very difficult to clean the tubing and pipe fitting during the process.

High quality brass hose adapter. With twice the copper of our standard 3/8 inch. Perfect for brewing applications. Support reading with Centigrade or Fahrenheit unit. 12' of vinyl tubing is shipped in 1 continuous piece, allowing you to simply cut to the desired length of your input & output hoses. Safe on skin as well as soft metals such as stainless steel, aluminum, and on plastics.

1/2" stainless steel Quick Disconnect Fitting NPT.


Similar products

---

1/2" Female Quick Disconnect 304 Stainless Steel 1/2" Barb

Perfect for Brewing Applications. Odorless, tasteless, and inert. 304 food grade stainless steel. Origin: China. 1/2" barb fitting. Origin: China. Dual relay output, be able to connect with refrigeration and heating equipment at the same time. Made from Stainless Steel 304. 1/2fpt on one side, with a 1/2Barb on the other.

Safe on skin as well as soft metals such as stainless steel, aluminum, and on plastics. Stainless Steel 304. With twice the copper of our standard 3/8 inch. Good electrical and weather ability properties - resists u. V. Gases, ozone, and moisture. Silicone tubing, 3/4"od, 1/2"id, 1/8"wall - 25 feet. All parts made with solid 304 Stainless Steel.

Perfect for home brewing. Works with 1/2 inch. 1/2 inch quick disconnect Female Threaded NPT. Maximum output load: 1100W110V. 12' of vinyl tubing is shipped in 1 continuous piece, allowing you to simply cut to the desired length of your input & output hoses.


Similar products