Red Lion RJS-75-PREM 602207 Premium Cast Iron Shallow Well Jet Pump

Includes factory pre-set 30/50 pressure switch & can produce up to 50 psi with automatic shut-off. Features include a factory pre-set 30/50 pressure switch that produces up to 50 psi with automatic shut-off, a heavy-duty dual voltage 115/230 Volt motor that comes standard with a capacitor to increase starting power, and a glass-filled thermoplastic impeller and diffuser for superior performance and efficient water flow.

Glass-filled thermoplastic impeller and diffuser allows for superior performance and efficient water flow. Our red lion rjs-prem series is the best performing pump in the retail market, farms, ideal for the supply of fresh water to rural homes, and cabins that have suction lifts down to 25 feet. Its rugged cast-iron construction is designed for years of service and reliability.

Heavy-duty dual voltage 115/230 Volt motor features capacitor for increased starting power. Premium shallow well jet pump is able to handle the water demands of large homes, cottages, and farms. Rugged cast iron casing designed for years of service and reliability.

---

Brands2O TC2104-P2 Well Pump Pressure Gauge

Monitors the pumps performance. 1/4-inch nPT connection size. Itrsquo;s important to keep track of your jet or submersible pump to ensure good performance and to stay on track for tuneups and replacement needs. This pressure control gauge features clearly marked PSI indicators that will tell you just how your pumps are doing at any given time.

Also monitors water pressure. The flotec tc2104 will make your work easier by giving you a clear and concise reading of what your pump is doing at all times. Flotec products are made to last and the Flotec TC2104 is no different. The product fits easily into frac14;rdquo; female national pipe thread FNPT and can be easily installed for your convenience.

. About the flotec tc2104 pressure gauge for jet/submersiblewell and Sprinkler Pumps, 0100 PSI The Flotec TC2104 is a highperformance and highquality tool that allows you to monitor the performance of your jet or submersible well pumps. Brass fitting, Plastic housing and plastic lens. Measures from 0 to 100 psi.

Use with submersible or jet pumps. Easy to install and easy to use, yoursquo;ll enjoy having this pressure gauge around for a long time to come thanks to the tough materials itrsquo;s made from.


Similar products

---

Flotec TC2501LF Well Pump Foot Valve

Overall width - Side to Side: -2. 8". Country of Manufacture: -United States. Overall product Weight: -09 lbs. 1/4-inch nPT connection size. Also monitors water pressure. Use with submersible or jet pumps. Brass fitting, Plastic housing and plastic lens. For use as inlet of suction pipe. Well pump foot valve. Protects pump from large debris.

Measures from 0 to 100 psi. Aids in priming pump. Brass construction. For use as inlet of suction pipe, 1 1/4-Inch threaded. Low lead, aids in priming pump, protects pump from large debris. Protects against loss of prime. Overall depth - Front to Back: -2. 4". Dimensions: overall Height - Top to Bottom: -5. 4". Product type: -Foot Valve.

Low lead, carded. Protects against loss of prime.


Similar products

---

WaterWorker HT-20B Vertical Pressure Well Tank, 20-Gallon Capacity, Blue

The actual physical size of a pre-charged tank is much less and allows space savings up to 50% when comparing drawdown and size to that of a conventional tank. For use as inlet of suction pipe, 1 1/4-Inch threaded. Designed to meet the requirements of, and are listed by the National Sanitation Foundation NSF under ANSI/NSF Std 61.

The butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks. Designed to keep pump starts to a minimum. Increases pump life and saves energy. Capacity gal. 42, max. Protects against loss of prime. This tank has a rated size of 42 gallons; the actual tank capacity is 20 gallons.

Brass construction. The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water. Use with submersible or jet pumps. Psi: 50, inner aquacell butyl diaphram, Material: Outer steel shell, polypropylene liner Measures from 0 to 100 psi. Also monitors water pressure.

A high gloss enamel finish protects tank from the elements.


Similar products

---

Square D by Schneider Electric FSG2J24CP 40-60 PSI Pumptrol Water Pressure Switch

Monitors the pumps performance. Designed to meet the requirements of, and are listed by the National Sanitation Foundation NSF under ANSI/NSF Std 61. Measures from 0 to 100 psi. Suitable for jet pumps, submersible pumps and reciprocating pumps. 1/4 in. Pressure connection. Brass fitting, Plastic housing and plastic lens.

40-60 psi pumptroltM Water Pressure Switch. Diaphragm, liner isolate water from contact with deep drawn steel domed shell - twice as strong as rolled steel shell of same thickness. Use with submersible or jet pumps. 40 - 60 psi. 1/4-inch nPT connection size. The butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks.

Low lead, aids in priming pump, protects pump from large debris. The product is High durable and meets the customer requirement. For use as inlet of suction pipe, 1 1/4-Inch threaded. Standard-action contacts open on rising pressure. A high gloss enamel finish protects tank from the elements. The product is easy to use.




Similar products

---

WaterWorker HT-14HB Horizontal Pressure Well Tank, 14-Gallon Capacity, Blue

A high gloss enamel finish protects tank from the elements. Capacity gal. 30, discharge Port in. 1, dimensions D x H in. 15 x 18, inner aquacell butyl diaphram, Material: Outer steel shell, polypropylene liner Measures from 0 to 100 psi. Designed to keep pump starts to a minimum. A high gloss enamel finish protects tank from the elements.

Brass construction. Well pump foot valve. For use as inlet of suction pipe, 1 1/4-Inch threaded. This separates air from water, preventing corrosion and bacterial growth-in compliance with FDA regulations. The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water.

Use with submersible or jet pumps. Brass fitting, Plastic housing and plastic lens. 1/4-inch nPT connection size. Diaphragm, liner isolate water from contact with deep drawn steel domed shell - twice as strong as rolled steel shell of same thickness. The actual physical size of a pre-charged tank is much less and allows space savings up to 50% when comparing drawdown and size to that of a conventional tank.

The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water. This tank has a rated size of 30 gallons; the actual tank capacity is 14 gallons.


Similar products

---

Simmons 1160/PM500 No.2 Pitcher Pump

Designed to meet the requirements of, and are listed by the National Sanitation Foundation NSF under ANSI/NSF Std 61. Designed to meet the requirements of, and are listed by the National Sanitation Foundation NSF under ANSI/NSF Std 61. Simmons makes lead-free water well supplies, well points, well seals, splicing kits, torque arrestors, well caps, frost-proof hydrants, tank tees,  check valves, pitless adapters, pressure switches, including: foot valves, pressure gauges, insert fittings and air volume controls.

40-60 psi pumptroltM Water Pressure Switch. The butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks. 40 - 60 psi. The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water.

Pre-charged to 25psi: please refer to product manual for proper pre-charge setting. Well pump foot valve. A high gloss enamel finish protects tank from the elements. A high gloss enamel finish protects tank from the elements. Cap can be adjusted for a wide range of handle positions. The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water.




Similar products

---

Pentek 150233, Big Blue, 1" In/Out, #20 Blue/Black, HFPP, w/ PR

Use with submersible or jet pumps. All bolt lugs are reinforced for maximum strength. Pre-charged to 25psi: please refer to product manual for proper pre-charge setting. Monitors the pumps performance. For use as inlet of suction pipe, 1 1/4-Inch threaded. A high gloss enamel finish protects tank from the elements.

All parts are made from close grain cast iron for optimum strength. It has an initial pressure drop of 1 pound per square inch psi at a flow rate of 15 gallons per minute gpm, a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F 37. 8 degrees C. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

Low lead, aids in priming pump, protects pump from large debris. Pressure connection. Standard-action contacts open on rising pressure. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the maximum flow rate, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

Water filters are used in a wide range of applications, industrial processes, swimming pools, and irrigation, including drinking water purification, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems.


Similar products

---

WaterWorker HT20HB Horizontal Pressure Well Tank, 20-Gallon Capacity, Blue

Protects against loss of prime. Brass fitting, Plastic housing and plastic lens. The butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks. Use with submersible or jet pumps. Capacity gal. 20, material: steel, includes: Tank, polypropylene Measures from 0 to 100 psi.

Reinforced polypropylene sump for strength and chemical resistance. Cap can be adjusted for a wide range of handle positions. Diaphragm, liner isolate water from contact with deep drawn steel domed shell - twice as strong as rolled steel shell of same thickness. 1/4 in. Psi: 100, dimensions D x H in. 30 x 15, discharge Port in.

1, max. Max. Suitable for jet pumps, submersible pumps and reciprocating pumps. A high gloss enamel finish protects tank from the elements. The butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks. A high gloss enamel finish protects tank from the elements.




Similar products

---

Red Lion RL20 Vertical Precharged Diaphragm Well Tank, 20-Gallon

Large filter housing for high-flow and heavy sediment applications. Pressure connection. The generous 20 gallon capacity will keep plenty of water ready for use in your kitchen or laundry room, and the flat base rests on any level surface near your pump. All bolt lugs are reinforced for maximum strength. 1/4-inch nPT connection size.

Diaphragm, liner isolate water from contact with deep drawn steel domed shell - twice as strong as rolled steel shell of same thickness. The butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks. The polypropylene liner for the water reservoir will not flake, chip, crack or peel and does not impart taste and odor to the water.

Model number: rl20 maximum capacity: 20 gallons Pressure Range: 30 to 50 PSI Dimensions: 16" dia. Store water from your cistern or well safely using the Red Lion Vertical Pressure Tank. X 28. 75"h mounting: place on flat surface Construction: metal, butyl Mfg. Connect 1" piping from your pump to this tank for moving water regularly.

The butyl, double diaphragm inside the tank is FDA approved, and keeps air separate from the water. A knob on the top of the tank accommodates a pump bracket not included, if you wish to attach your existing pump not included to the item.


Similar products

---

Red Lion 305584007 Overhaul Kit for RJS-75-PREM Pump

Monitors the pumps performance. 1/4 in. Heavy-duty steel construction. Designed to meet the requirements of, and are listed by the National Sanitation Foundation NSF under ANSI/NSF Std 62. A high gloss enamel finish protects tank from the elements. Designed for rugged long life service. Use with a 20" x 4-1/2" filter cartridge sold separately.

Brass construction. Contains item #'s 3, 6, 7, 4, 5, & 8.1/4-inch nPT connection size. Use with submersible or jet pumps. Standard-action contacts open on rising pressure. Pre-charged to 25psi: please refer to product manual for proper pre-charge setting. The butyl diaphragm has seamless construction and is designed to flex rather than stretch and crease like bladder tanks.

Ansi/nsf approved. Designed to meet the requirements of, and are listed by the National Sanitation Foundation NSF under ANSI/NSF Std 61. Contains item #'s: 3, 4, 5, 6, 7 and 8. For use with rjs-75-prem. Suitable for jet pumps, submersible pumps and reciprocating pumps. Pressure connection.


Similar products