Taco 329-T3 Cast Iron 1/2-Inch FPT x 1/2-Inch FPT Pressure Reducing Valve

Exclusive Lockable Fast-Fill Lever. Fast Fill Rates. Adjustable from 10 - 25 PSI. Built-in check-Prevents emptying system in incoming pressure fails. Taco boiler feed valves automatically feed water to a system whenever pressure in the system drops below the pressure setting of the valve. The dual control models combine the boiler feed with an in-line pressure relief valve.

.

---

Taco 400-4 1/8-Inch-NPT Float Air Hy-Vent

025-inch, 05-inch and 075-inch --and operating pressure ratings up to 150 psi, these brass-body, nickel-plated vents meet the system requirements of even your largest installations. The high-capacity, float-style vent can be placed either on the boiler or at the high points throughout the system. Sturdy Brass Construction.

With threaded connections--. 125-inch. Maximum Temperature 240F. Designed for use on hot water radiators, radiant panels, baseboards, convectors, and small unit heaters with a maximum working pressure of 150 psi. The taco 400 hy-vent can be opened top is threaded on and cleaned. Maximum Pressure 150 psi.


Similar products

---

AMTROL EX-30 30 Extrol Expansion Tank

Over six decades later, Extrol is still the world's leading expansion Sturdy Brass Construction. Sealed air cushion - factory pre-charged and 100% tested. Designed for use on hot water radiators, convectors, baseboards, radiant panels, and small unit heaters with a maximum working pressure of 150 psi. The taco 400 hy-vent can be opened top is threaded on and cleaned.

Inline well tank. Amtrol Inc. Strong, deep-drawn steel tank. Thick, heavy duty Butyl/EPDM diaphragm for long service life. Watertight reservoir for expanded water. Maximum Pressure 150 psi. Maximum Temperature 240F. Designed and patented the first Extrol diaphragm expansion tank in 1954 to control system pressure and help reduce energy consumption in heating and chilled water systems.

.


Similar products

---

Watts ETX-30 4.7-Gallon Non-Potable Expansion Tank for Closed-Loop Systems

Strong, deep-drawn steel tank. Designed for use on hot water radiators, baseboards, radiant panels, convectors, and small unit heaters with a maximum working pressure of 150 psi. The taco 400 hy-vent can be opened top is threaded on and cleaned. Inline well tank. Durable steel tank with 60 psi maximum working pressure.

Use the watts series etx water expansion tank in tandem with your hot water heater to absorb increased water volume resulting from hot water boiler heating and keep system pressure below the relief setting. Maximum Temperature 240F. Maximum Pressure 150 psi. For use in closed-loop, non-potable water heating systems^4.

7-gallon capacity^Durable steel tank^60 psi maximum working pressure. Thick, heavy duty Butyl/EPDM diaphragm for long service life. Use in closed-loop, non potable water heating systems. Sealed air cushion - factory pre-charged and 100% tested. Sturdy Brass Construction. Watertight reservoir for expanded water.

.


Similar products

---

Apollo Valve 10-400 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 3/4" NPT Female

This apollo valve 10-400 series safety relief valve has a bronze body, a 30 pounds per square inch psi relief pressure, a 3/4" female National Pipe Thread NPT inlet connection, and a 3/4" female NPT outlet.250 degrees f maximum temperature for use in high-temperature applications. Relief valves are used in a variety of applications, petrochemical and chemical manufacturing, natural gas processing, such as air compressors, and power generation.

Apollo valves manufactures ball, water gauges, and relief valves, heating and plumbing products, mixing, actuators, marine fittings, and backflow prevention. Thick, heavy duty Butyl/EPDM diaphragm for long service life. Astm b584 bronze body and nozzle and stainless steel spring for corrosion resistance.

The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. Maximum Pressure 150 psi. Maximum Temperature 240F. The company, founded in 1928 and headquartered in matthews, NC, meets international standard International Organization for Standardization ISO/IEC standard 17025:2005.

Watertight reservoir for expanded water. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit.


Similar products

---

Taco 007-F5 Cast Iron Circulator, 1/25 HP

Unmatched reliability maintenance free. Astm b584 bronze body and nozzle and stainless steel spring for corrosion resistance. Unique replaceable cartridge design. Standard high capacity output. Quiet, efficient operation. Thick, heavy duty Butyl/EPDM diaphragm for long service life. Universal flange-to-flange dimensions.

The unique replaceable cartridge contains all the moving parts, and allows the circulator to be serviced instead of replacing the entire unit. Maximum Pressure 150 psi. Sealed air cushion - factory pre-charged and 100% tested. For use in closed-loop, non-potable water heating systems^4. 7-gallon capacity^Durable steel tank^60 psi maximum working pressure.

Strong, deep-drawn steel tank. Designed for use on hot water radiators, convectors, baseboards, radiant panels, and small unit heaters with a maximum working pressure of 150 psi. The taco 400 hy-vent can be opened top is threaded on and cleaned. Inline well tank. The taco 007 residential water circulator Pump is designed for use in hydronic heating, chilled fresh water systems, and domestic water systems.

Watertight reservoir for expanded water.


Similar products

---

Watts 0590715 1/8" FV-4M1 Automatic Float Vent

Float is high temperature resistant polyethylene. Designed for use on hot water radiators, convectors, baseboards, radiant panels, and small unit heaters with a maximum working pressure of 150 psi. The taco 400 hy-vent can be opened top is threaded on and cleaned. Inline well tank. Maximum pressure: 150 psi 10 bar.

It consists of a brass body construction with female NPT connection, polyethylene float with valve plug, air vent with silicone rubber seal, brass cover, and automatic vent. For use in closed-loop, non-potable water heating systems^4. 7-gallon capacity^Durable steel tank^60 psi maximum working pressure. Maximum Pressure 150 psi.

Sturdy Brass Construction. Quiet, efficient operation. Astm b584 bronze body and nozzle and stainless steel spring for corrosion resistance. It can also be installed to permit the separation and dispersal of air while fluid is circulating in the system. Watts series fv-4 automatic vent valves are used in commercial and residential hydronic heating applications to provide automatic air venting for hot or cold water distribution systems.

Maximum Temperature 240F. Unmatched reliability maintenance free.


Similar products

---

Apollo Valve 10-400 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 3/4" NPT Male x Female

Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. 250 degrees f maximum temperature for use in high-temperature applications.

Strong, deep-drawn steel tank. Thick, heavy duty Butyl/EPDM diaphragm for long service life. Maximum pressure: 150 psi 10 bar. Float is high temperature resistant polyethylene. Astm b584 bronze body and nozzle and stainless steel spring for corrosion resistance. Universal flange-to-flange dimensions. This safety valve is american society of Mechanical Engineers ASME safety rated for Section IV hot water heating boilers and hydronic heating systems.

Relief valves remove excess pressure or vacuum from a system. Unmatched reliability maintenance free. Asme safety rated for Section IV water heating systems. Sealed air cushion - factory pre-charged and 100% tested. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit.

This apollo valve 10-400 series safety relief valve has a bronze body, a 3/4" male National Pipe Thread NPT inlet connection, a 30 pounds per square inch psi relief pressure, and a 3/4" female NPT outlet.


Similar products